• black icon of a bullhorn 30 years industry experience
  • black icon of three cubes Over 8,000 products in stock
  • Black icon of a clock Order by 16:00 and receive the next working day (Monday-Thursday) 15:00 Friday
Motors Motors
15/08/2019

DC motors with Hall sensors

Doga DC motor with hall sensor 319H
The Hall sensor is a simple and economical solution to assist in the control of a motor.
DOGA has designed a motor that includes two Hall sensors allowing the user to have precise feedback on speed, position and direction of rotation of the motor.

The 316, 317 and 319 series are all available with Hall sensors and are suitable for applications that require precise feedback e.g. agriculture, building access, care aid, medical, office equipment, marine and general industrial automation.

 

Each Hall sensor gives high and low pulses (see channel A and B in fig.1.)

Channel A allows the user to count the pulses to determine the motor speed and position; channel B allows the user to determine the direction of rotation of the motor due to the 90° electrical offset between channels A and B.

 

The sensors are integrated within the motor therefore the dimensions remain unchanged compared to the version without hall sensors and are designed to work at multiple supply voltages specific to the user’s application.

 

The resistances “R” will be implemented by the user within their controller with the values specified for their specific operating voltage 5, 12 or 24 V (see fig .2.)

Graph showing output signal for 319H Doga motor
connection diagram for 319H hall sensor motor

Features

  • Up to 972ppr feedback
  • Low voltage 12-24 V dc motor supply
  • High starting torque - up to 60Nm 
  • DC motor with worm gearbox – compact, low noise & cost effective 
  • Bespoke customisation available 
 

Related Products

Contact us

If you need any help, you can contact us in one of the following ways:

0116 284 9900

Send an e-mail

Use live chat