Safety Relays
- 24Vac/dc, 230Vac, 8-36Vdc, and 12Vdc options
- Standstill monitors
- Two hand control relays
- Safety Cat.3 (PLd) and Safety Cat.4 (PLe) versions available
Duelco SSO-2010 Standstill monitor
- Safety Category 4 (PLe)
- 3 NO safety outputs + 1 NC safety output
- 2 semiconductor monitoring outputs
- 1 NO monitoring output
- Delayed outputs (0 - 6 sec.)
Duelco - NST-3.2 Safety Relay
- Safety Category 3 (PLd)
- 3 NO safety outputs
- 1 NC output
- Status/fault indication via LEDs
- Short circuit monitoring
Duelco - NST-2004 Safety Relay
- Safety Category 4 (PLe)
- 3 NO safety outputs
- 1 transistor output or 1 NC contact
- Status/fault indication via LEDs
- Short circuit monitoring
Duelco EU-2001F Extention Module
- Up to Safety Category 4 (PLe)
- 4 NO Safety Contact with or without delay
- 1 Transistor output
- Status/fault indication via LEDs
Duelco - Safety Contoller
- Base DSC-M1 Unit 8-Inputs 4-OSSD Outputs
- Wide variety of expansion units
- Fieldbus modules
- PLe/SIL3
Duelco - Two Hand Control Stations
- Smelted-aluminium cover-part with a protection lid over each pushbutton
- Equipped with two black push buttons and emergency stop button
- Fulfils the requirements in EN 574
- 2 mm rubber seal to protect the terminals against dust, oil and water
- IP65 with supplied pushbuttons
Duelco NST-2009D Safety Relay with Timed Outputs
- Safety Category 4 (PLe)
- 2 NO safety outputs + 1 NC signal output
- 2 NO delayed outputs (0 - 600 sec)
- Status-/fault indication via LEDs
- Short circuit monitoring
Duelco HR-2007F Two Hand Control Relay
- Safety Category 4 / Performance level e
- Type IIIC (EN 574)
- Status-/fault indication via LEDs
- 2 NO safety outputs
- Available with 230VAC and 24V AC/DC supply voltage
Duelco - NST-2007F Safety Relay
- Safety Category 4 (PLe)
- 3 NO safety outputs
- 1 NC status output
- Status-/fault indication via LEDs
- Short circuit monitoring
Duelco NST-2008F Safety Relay
- Supply voltage 24 V DC
- 3 NO safety output+ 1 NC signal output
- Also suitable for use with non-contacting safety limit switches
Related
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
High speed mark detection with miniature contrast sensors
If you're looking for more speed and accuracy, this new contrast sensor will work for you.
About safety mats, bumpers and door curtains
Do you need help with the safety of your industrial doors, gates, or high-speed doors? Whether you require safety edges, light curtains, safety bumpers, or complete control systems, we can help.
Barcode verification in Intralogistics, Warehouses and Food & Beverage
If you are a machine builder or system integrator within the manufacturing, intralogistics or food and bev industry. Take a look at our article on barcode verification.
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
