KÜBLER
Kuebler - Magnet sensor LI20 with magnetic ring RI20
The combination RI20/LI20 is used to measure length via a rotary shaft, e.g. in woodturning machines, materials handling, overhead cranes, etc. This sensor is more or less totally impervious to chips, oil, dust and water and thus can be used in troublesome environments, it is sealed and has no moving parts. The sensor is fitted to read on a yoke. This yoke is available for shaft dimensions 8-30 mm. There are three different yoke sizes; 31 mm, 41.2 mm and 45 mm.
The yoke RI20 has a pole distance of 2 mm. The distance between the sensor and the yoke should be 0.1 to 1.0 mm (recommended 0.4 mm). For the magnet sensor, the slope must not exceed ±3°, the rotation must not exceed ±3° and the offset must not exceed ±1 mm.
The following information is required to select the right combination:
- yoke size
- max. shaft rotation speed (given the frequency to following systems)
Pulses/revolution | Yoke | Magnet sensor | Max. revolutions (rpm) |
250 | RI20.031.XXXX | LI20.11X1.2005 | 12000 |
1000 | RI20.031.XXXX | LI20.11X1.2020 | 2400 |
2500 | RI20.031.XXXX | LI20.11X1.2050 | 3900 |
1024 | RI20.041.XXXX | LI20.11X1.2016 | 7000 |
360 | RI20.045.XXXX | LI20.11X1.2005 | 12000 |
3600 | RI20.045.XXXX | LI20.11X1.2050 | 2700 |
- Robust and able to withstand vibration
- Easy to install
- High resolution
- IP67. Impervious to chips, oil, water, etc.
Selected variant
Technical data
Product description
The combination RI20/LI20 is used to measure length via a rotary shaft, e.g. in woodturning machines, materials handling, overhead cranes, etc. This sensor is more or less totally impervious to chips, oil, dust and water and thus can be used in troublesome environments, it is sealed and has no moving parts. The sensor is fitted to read on a yoke. This yoke is available for shaft dimensions 8-30 mm. There are three different yoke sizes; 31 mm, 41.2 mm and 45 mm.
The yoke RI20 has a pole distance of 2 mm. The distance between the sensor and the yoke should be 0.1 to 1.0 mm (recommended 0.4 mm). For the magnet sensor, the slope must not exceed ±3°, the rotation must not exceed ±3° and the offset must not exceed ±1 mm.
The following information is required to select the right combination:
- yoke size
- max. shaft rotation speed (given the frequency to following systems)
Pulses/revolution | Yoke | Magnet sensor | Max. revolutions (rpm) |
250 | RI20.031.XXXX | LI20.11X1.2005 | 12000 |
1000 | RI20.031.XXXX | LI20.11X1.2020 | 2400 |
2500 | RI20.031.XXXX | LI20.11X1.2050 | 3900 |
1024 | RI20.041.XXXX | LI20.11X1.2016 | 7000 |
360 | RI20.045.XXXX | LI20.11X1.2005 | 12000 |
3600 | RI20.045.XXXX | LI20.11X1.2050 | 2700 |
Ordering information
Please refer to the images below for ordering information.
Related
Signal Lights For You
New signal lights from Auer Signal are now available! The first products to be launched in this series are the Smart Dot 50 in the Basic and Standard versions, as well as the Smart Indicator 50 in the Basic version.
Optimise your production line with sensors
Optimise your production line with encoders, inclinometers, displays and slip rings
The Smallest Safety Laser Scanner on the market by Hokuyo
Designed for high-performance safety applications such as material handling, conveyors, robotics, and system integration. OEM Automatic is excited to announce its latest supplier partnership with Hokuyo
Every angle covered with 90 degree cable entry system
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
Control Box Assembly for Industrial Electricity Metering - A case study
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
ATEX - Learn about explosion safety in hazardous environments
ATEX ensures that both equipment and work processes are designed to minimize these risks and create a safe working environment.
