LUMEL
Lumel RP3 three phase power controller
The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)
This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.
The application area of RP3 power controllers comprises:
• electrical furnaces and drying constructions, particularly industrial tunnels and belt- type furnaces, furnaces for annealing and hard soldering, crucible furnaces and smelters, furnaces for hardening in salt baths
• devices of mechanical engineering, aggregates and extruding presses for plastics, devices, for winding and tempering of springs, spot welding and seam welders
• production of glass and glazing, installations and devices for drying in infrared and ultraviolet radiation, ladles for glass melt and heating of feeding devices, furnaces for glass forming• chemical and petroleum industries, facing heaters of tube installations, preheating installations
KINDS OF CONTROL
• On-off control
• Chopper control:
o fast cycle - fi,max » 1 Hz
o slow cycle - fi,max » 0.1 Hz
o Phase control
ADDITIONAL FUNCTIONS
• Load current limitation
• Delay of soft start tripping type
• Control of the initial gating angle value
• Control of the input line amplification
• Supervising and signalling of the current in the load circuit, output U= f(lo)
• Supervising of the radiator temperature
• Signalling of the fuse damage
• Signalling of the incorrect phase sequence
• Signalling of overload
• Relay outputs
Â
- Contactless power switching on
- Output current up to 450 A
- Alarming relay outputs
- Control by an impulse, analogue or potentiometer signal
Selected variant
Technical data
| Dimensions | 212 x 318 x 177 mm |
|---|---|
| Output | Maximum output current 125A |
| Temperature operational max | 40 °C |
| Temperature operational min | 0 °C |
| Weight | 8.5 kg |
Downloads
Product description
The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)
This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.
The application area of RP3 power controllers comprises:
• electrical furnaces and drying constructions, particularly industrial tunnels and belt- type furnaces, furnaces for annealing and hard soldering, crucible furnaces and smelters, furnaces for hardening in salt baths
• devices of mechanical engineering, aggregates and extruding presses for plastics, devices, for winding and tempering of springs, spot welding and seam welders
• production of glass and glazing, installations and devices for drying in infrared and ultraviolet radiation, ladles for glass melt and heating of feeding devices, furnaces for glass forming• chemical and petroleum industries, facing heaters of tube installations, preheating installations
KINDS OF CONTROL
• On-off control
• Chopper control:
o fast cycle - fi,max » 1 Hz
o slow cycle - fi,max » 0.1 Hz
o Phase control
ADDITIONAL FUNCTIONS
• Load current limitation
• Delay of soft start tripping type
• Control of the initial gating angle value
• Control of the input line amplification
• Supervising and signalling of the current in the load circuit, output U= f(lo)
• Supervising of the radiator temperature
• Signalling of the fuse damage
• Signalling of the incorrect phase sequence
• Signalling of overload
• Relay outputs
Â
Related
Terminal Blocks For Push In Connection Systems
This innovative push-in connection system enables time savings of up to 50%, whether you're wiring control panels or managing complex installations
Electrical Protection in the Solar Era: How to Choose Fuses for Modern Photovoltaic Installations
Solar energy has become a pillar of the global energy transition. The experts at OEM Automatic have broken down the role of photovoltaic fuses and their contribution to solar systems, as well as, how to choose the right solution for you.
Fuse links for semiconductor protection
Ultra fast-acting fuse links engineered specifically to shield delicate semiconductor devices.
Lightning and surge protection for DC and control signals
Do you need reliable protection for measuring and control equipment? DEHN YellowLine delivers voltage surge protection tailored for building, measuring, and control systems
MCBs vs ECBs: Which is best for securing DC circuits?
Choosing the right circuit breaker is important for protecting DC circuits. Two primary forms of protection are MCBs and ECBs. The experts at OEM Automatic breakdown the two circuit breakers for you!
Signal Lights For You
New signal lights from Auer Signal are now available! The first products to be launched in this series are the Smart Dot 50 in the Basic and Standard versions, as well as the Smart Indicator 50 in the Basic version.Â
