CONTA-CLIP
Pick-off terminals and test adapters
MAG, SMAG, STA, TA, ZTA, EP
CONTA-CLIP offers specific and innovative accessories for the SRK I SSL screw connection system.
Pick-off terminals SMAG
- The SMAG pick-off terminals make possible one or two additional extra wire connectors onto the SRK terminal blocks and therefore extend the standard feed-through terminal by up to four connectors.
- The SMAGs are mechanically snapped into the SRK terminal blocks.
- The SMAG busbar is connected via the corresponding base connection of the terminal block, the rated cross section is thereby reduced to the next lower size.
Â
Test adapter STA
- The ST test adapter can be used to quickly and safely test pre-wired terminal blocks.
- Â A test plug block can be mounted with any number of poles using the locking pegs and the STAÂ ZP intermediate plate with widths from 1 to 3 mm. The STAÂ ZP intermediate plate allows the assembly of a test plug block, which can also be mounted on different block widths (SRK/SSL 2.5 | 4 | 6 | 10).
- Thanks to its innovative design the STA test adapter can be rotated through 180°. It can therefore also be mounted onto the SRK terminal block, whereby one of the cross-connection channels is already occupied by a cross-connector. Â
- STA, SMAG compatible with SRK series
- SMAG extends standard feed-through terminal up to 4 connections
- STA test adapters for SRK series
- TA test adapters dfor RK series
- ZTA Test adaptors for ZIZA/ZRK series
Selected variant
Technical data
General data |
|
|---|---|
| Rated wire cross section | 2.5 mm² |
| Colour | Beige |
| Rated voltage IEC | 800 V |
| Rated current IEC | 24 A |
| Load current max | 32 A |
| Rated impulse voltage | 8 kV |
| Overvoltage category | III |
| Contamination degree | 3 |
| Approvals | EAC |
| Additional information | for SRK 4/2A |
Dimensions |
|
| Length | 37.8 mm |
| Width | 5.9 mm |
| Height TS 35/7.5 | 53 mm |
| Height | 26.7 mm |
Connection data |
|
| Connections | 1 |
| Plug gauge acc. EN 60 947-1 | A3 |
| Cross section single wire from | 0.2 mm² |
| Cross section single wire to | 4 mm² |
| Cross section stranded wire from | 0.2 mm² |
| Cross section stranded wire to | 4 mm² |
*Invisible Heading* |
|
|---|---|
| Cross section stranded with ferrule from | 0.2 mm² |
| Cross section stranded with ferrule to | 2.5 mm² |
| Rated wire cross section from (AWG) | 22 |
| Rated wire cross section to (AWG) | 12 |
| Stripping length | 10 mm |
| Screw size | M 2,5 |
| Screw type | Slotted |
| Torque min | 0.4 |
| Torque max | 0.8 |
Materials |
|
| Insulation material | Polyamide 6.6 |
| Flammability class | UL94-V0 |
| Operating temperature from | -40 °C |
| Operating temperature to | 120 °C |
Approvals |
|
| EAC test standard | TR ZU 004/2011 |
Additional data |
|
| Tariff code | 85369010 |
| Country of origin | DE |
| Weight | 6.1 g |
| Pack size | 10 Â |
| Type of terminal | Screw Terminals, DIN Rail terminals |
Product description
CONTA-CLIP offers specific and innovative accessories for the SRK I SSL screw connection system.
Pick-off terminals SMAG
- The SMAG pick-off terminals make possible one or two additional extra wire connectors onto the SRK terminal blocks and therefore extend the standard feed-through terminal by up to four connectors.
- The SMAGs are mechanically snapped into the SRK terminal blocks.
- The SMAG busbar is connected via the corresponding base connection of the terminal block, the rated cross section is thereby reduced to the next lower size.
Â
Test adapter STA
- The ST test adapter can be used to quickly and safely test pre-wired terminal blocks.
- Â A test plug block can be mounted with any number of poles using the locking pegs and the STAÂ ZP intermediate plate with widths from 1 to 3 mm. The STAÂ ZP intermediate plate allows the assembly of a test plug block, which can also be mounted on different block widths (SRK/SSL 2.5 | 4 | 6 | 10).
- Thanks to its innovative design the STA test adapter can be rotated through 180°. It can therefore also be mounted onto the SRK terminal block, whereby one of the cross-connection channels is already occupied by a cross-connector. Â
Related
Lightning and surge protection for DC and control signals
Do you need reliable protection for measuring and control equipment? DEHN YellowLine delivers voltage surge protection tailored for building, measuring, and control systems
Signal Lights For You
New signal lights from Auer Signal are now available! The first products to be launched in this series are the Smart Dot 50 in the Basic and Standard versions, as well as the Smart Indicator 50 in the Basic version.Â
Optimise your production line with sensors
Optimise your production line with encoders, inclinometers, displays and slip rings
Every angle covered with 90 degree cable entry system
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller ever on limited time discount
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
11 questions to get the right signalling device – a whitepaper
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
