CONTA-CLIP
Triple deck terminals - IKD 2.5mm²/VMAK
IKD, VMAK
The IKD 2.5/Q triple‑deck DIN‑rail terminal block from CONTA‑CLIP (also known as VMAK 2.5) is a compact, space-saving module optimised for high-density wiring schemes. With a 5 mm width and 84.8 mm length (for 3‑pole), it provides three stacked screw-connection layers, each accommodating a 2.5 mm² conductor (22–14 AWG). The block taps M2.5 slotted screws (torque 0.4–0.8 Nm) and requires a 7 mm stripping length, ensuring secure connections under up to 250 V (IEC) and 24 A (CSA), at operating temperatures from –40 °C to +105 °C. The polyamide 6.6 housing meets UL94‑V2 flame resistance, while snap‑on feet fit both TS35/7.5 and TS32 rails. Options include variants for feed-through, protective earth (PE), and plug-in connectors, along with accessories like end plates, cross-connectors, test sockets, and jumper rails to streamline installation.
In practical applications, IKD 2.5/Q triple‑deck terminals are ideal for control cabinets, automation systems, and signal distribution panels where conductor layering, circuit segmentation, and test access are crucial—but panel real estate is limited. Their stacked design handles multiple circuits (e.g., supply, signal, and return) in just one block, reducing wiring clutter and simplifying maintenance. The blocks' compatibility with jumpers and test plugs makes them well-suited for modular test setups and diagnostic paths, while the UL/CSA/IEC approvals ensure compliance in industrial and commercial environments. Overall, the IKD series offers a robust, flexible solution for high-density, multi-level wiring needs.Â
- For connecting encoders or motor outputs
- Material polyamide 6.6
- Colour marked versions available
- Temperature resistance -40 ºC...+150 ºC
- Flammability class V2
Selected variant
Technical data
General data |
|
|---|---|
| Rated wire cross section | 2.5 mm² |
| Colour | Beige |
| Rated voltage IEC | 250 V |
| Rated current IEC | 24 A |
| Mounting | TS 35 |
| Rated impulse voltage | 4 kV |
| Overvoltage category | III |
| Contamination degree | 3 |
| Approvals | UL, cUL, KEMA KUR |
Dimensions |
|
| Length | 62.8 mm |
| Width | 5 mm |
| Height TS 35/7.5 | 58.3 mm |
| Height TS 32 | 62.8 mm |
Connection data |
|
| Connections | 4 |
| Number of levels | 3 Â |
| Plug gauge acc. EN 60 947-1 | A3 |
| Cross connect channels | 3 Â |
| Cross section single wire from | 0.2 mm² |
| Cross section single wire to | 4 mm² |
| Cross section stranded wire from | 0.2 mm² |
| Cross section stranded wire to | 4 mm² |
| Cross section stranded with ferrule from | 0.2 mm² |
| Cross section stranded with ferrule to | 2.5 mm² |
| Rated wire cross section from (AWG) | 22 |
*Invisible Heading* |
|
|---|---|
| Rated wire cross section to (AWG) | 14 |
| Stripping length | 7 mm |
| Screw size | M 2,4 |
| Screw type | Slotted |
| Torque min | 0.4 |
| Torque max | 0.8 |
Materials |
|
| Insulation material | Polyamide 6.6 |
| Flammability class | UL94-V2 |
| Operating temperature from | -40 °C |
| Operating temperature to | 105 °C |
Approvals |
|
| Rated voltage UL | 300 V |
| Rated current UL | 20 A |
| UL test standard | UL 1059 |
| Rated voltage cUL | 300 V |
| Rated current cUL | 20 A |
| cUL test standard | C22.2 No 158 |
| KEMA KEUR test standard | EN 60947-7-1:2009 |
Additional data |
|
| Tariff code | 85369010 |
| Country of origin | CZ |
| Weight | 10.81 g |
| Pack size | 100 Â |
| Type of terminal | Screw Terminals, DIN Rail terminals |
Product description
The IKD 2.5/Q triple‑deck DIN‑rail terminal block from CONTA‑CLIP (also known as VMAK 2.5) is a compact, space-saving module optimised for high-density wiring schemes. With a 5 mm width and 84.8 mm length (for 3‑pole), it provides three stacked screw-connection layers, each accommodating a 2.5 mm² conductor (22–14 AWG). The block taps M2.5 slotted screws (torque 0.4–0.8 Nm) and requires a 7 mm stripping length, ensuring secure connections under up to 250 V (IEC) and 24 A (CSA), at operating temperatures from –40 °C to +105 °C. The polyamide 6.6 housing meets UL94‑V2 flame resistance, while snap‑on feet fit both TS35/7.5 and TS32 rails. Options include variants for feed-through, protective earth (PE), and plug-in connectors, along with accessories like end plates, cross-connectors, test sockets, and jumper rails to streamline installation.
In practical applications, IKD 2.5/Q triple‑deck terminals are ideal for control cabinets, automation systems, and signal distribution panels where conductor layering, circuit segmentation, and test access are crucial—but panel real estate is limited. Their stacked design handles multiple circuits (e.g., supply, signal, and return) in just one block, reducing wiring clutter and simplifying maintenance. The blocks' compatibility with jumpers and test plugs makes them well-suited for modular test setups and diagnostic paths, while the UL/CSA/IEC approvals ensure compliance in industrial and commercial environments. Overall, the IKD series offers a robust, flexible solution for high-density, multi-level wiring needs.Â
Related
We now offer cable
What tri-rated cable are you currently using? Does the product or service you receive leave you wanting more? It’s time to ask the question. Because now, you’ve got options.
Terminal Blocks For Push In Connection Systems
This innovative push-in connection system enables time savings of up to 50%, whether you're wiring control panels or managing complex installations
Electrical Protection in the Solar Era: How to Choose Fuses for Modern Photovoltaic Installations
Solar energy has become a pillar of the global energy transition. The experts at OEM Automatic have broken down the role of photovoltaic fuses and their contribution to solar systems, as well as, how to choose the right solution for you.
Fuse links for semiconductor protection
Ultra fast-acting fuse links engineered specifically to shield delicate semiconductor devices.
Lightning and surge protection for DC and control signals
Do you need reliable protection for measuring and control equipment? DEHN YellowLine delivers voltage surge protection tailored for building, measuring, and control systems
MCBs vs ECBs: Which is best for securing DC circuits?
Choosing the right circuit breaker is important for protecting DC circuits. Two primary forms of protection are MCBs and ECBs. The experts at OEM Automatic breakdown the two circuit breakers for you!
