CONTA-CLIP
Plug In Din Rail - PK-TS
The pluggable PK-TS connection system was designed to meet the increasing demands for a quick modular way of connecting and disconnecting parts of electrical systems together.
For example; - if you have components, such as HMI’s on a front panel, lid or door of an enclosure the PK-TS can be used to quickly disconnect from the main controls inside the panel.
The wiring which connects the two parts is fed out of one panel with the PK-TS base element. The corresponding cables are placed on their counterpart in the second panel. The PK-TS base element is attached to the DIN rail using mounting feet which are fitted either with a TS15/35 or TS32/35 combi-foot for mounting on DIN rail. There are various options for the type of wire connection for the plug-in part (push-in, clamping yoke or eccentric). The PK-TS elements are available with 2 to 24 poles and with a screw flange. The PK-TS base elements with a screw flange use this flange to connect to the pluggable wire-connection component. This protects them from accidental loosening. Wires can be connected from different directions, depending on the selection of the PK-TS combination and counterpart. To avoid incorrect mating when using several PK-TS in one panel, both the PK-TS and its counterpart can be coded without loss of poles by using our proven CONTA-CON coding system.
Â
- TS15/25 or TS32/35 versions
- 2 pole to 24 pole
- Screw flange options
- Coding pins
- Polyamide 6.6-V-0
Selected variant
Technical data
General data |
|
|---|---|
| Colour | Green |
| Rated cross section | 2.5 mm² |
| Rated current | 10 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 4 kV |
| Overvoltage category | III |
| Contamination degree | 3 |
| Approvals | UL, cUL, VDE |
Dimensions |
|
| Length | 42.5 mm |
| Width | 11.68 mm |
| Height TS 35/7.5 | 35.5 mm |
| Height TS 32 | 40.5 mm |
| Pitch | 5.08 mm |
Connection data |
|
| Cross section single wire from | 0.2 mm² |
| Cross section single wire to | 4 mm² |
| Cross section stranded wire from | 0.2 mm² |
| Cross section stranded wire to | 2.5 mm² |
| Cross section stranded with ferrule from | 0.25 mm² |
| Cross section stranded with ferrule to | 2.5 mm² |
| Rated wire cross section from (AWG) | 28 |
| Rated wire cross section to (AWG) | 12 |
| Stripping length | 6 mm |
| Screw size | M 3 |
Materials |
|
| Flammability class | UL94-V0 |
| Operating temperature from | -30 °C |
| Operating temperature to | 105 °C |
Approvals |
|
| Rated voltage UL | 300 V |
| Rated current UL | 15 A |
| UL test standard | UL 1059 |
| Rated voltage cUL | 300 V |
| Rated current cUL | 15 A |
*Invisible Heading* |
|
|---|---|
| cUL test standard | C22.2 No 158 |
Additional data |
|
| Tariff code | 85366930 |
| Country of origin | TN |
| Weight | 9.59 g |
| Pack size | 50 Â |
| Plug-in cycles acc. to standard | 100 |
| Rated current VDE | 10 A |
| Rated voltage VDE | 250 V |
| Screw material | Steel |
| Torque | 0.5 |
| Type | Plug-in connection system |
| VDE test standard | DIN EN 61984 |
| Width left | 3.3 mm |
| Width right | 3.3 mm |
| Number of poles | 2 |
| Angle of wire connection/contact | 90° (vertically upwards) |
| Housing material | Polyamide 6.6 |
| Clamp material | Brass |
| Connection cycles acc. to standard | 5 |
| Connector type/principle | Screw |
| Connector version | Fixed |
| Contact flag | Copper alloy |
| Current creepage resistance | CTI 600 |
| Glow wire flammability index (GWFI) | GWFI 850 |
| Glow wire ignition temperature (GWIT) | GWIT 775 |
| GWFI after-glow time | 30 s |
| GWIT exposure time | 5 s |
| Insulation resistance | 1*10^13 Ω x cm |
| Length of pin header | 20.6 mm |
Technical illustrations
PK-TS Wire Entry - Horizontal Right
PKB950 Wire Entry - Vertical Above, Screw Connection - Horizontal
PK-TS Wire Entry - Horizontal Right
PKB1100 Wire Entry - Horizontal Left
PK-TS Wire Entry - Horizontal Right
PKB1110 Wire Entry - Horizontal Right
PK-TS Wire Entry - Horizontal Right
PKBT1200 Wire Entry - Vertical Above, Screw Connection- Vertical
Product description
The pluggable PK-TS connection system was designed to meet the increasing demands for a quick modular way of connecting and disconnecting parts of electrical systems together.
For example; - if you have components, such as HMI’s on a front panel, lid or door of an enclosure the PK-TS can be used to quickly disconnect from the main controls inside the panel.
The wiring which connects the two parts is fed out of one panel with the PK-TS base element. The corresponding cables are placed on their counterpart in the second panel. The PK-TS base element is attached to the DIN rail using mounting feet which are fitted either with a TS15/35 or TS32/35 combi-foot for mounting on DIN rail. There are various options for the type of wire connection for the plug-in part (push-in, clamping yoke or eccentric). The PK-TS elements are available with 2 to 24 poles and with a screw flange. The PK-TS base elements with a screw flange use this flange to connect to the pluggable wire-connection component. This protects them from accidental loosening. Wires can be connected from different directions, depending on the selection of the PK-TS combination and counterpart. To avoid incorrect mating when using several PK-TS in one panel, both the PK-TS and its counterpart can be coded without loss of poles by using our proven CONTA-CON coding system.
Â
Related
We now offer cable
What tri-rated cable are you currently using? Does the product or service you receive leave you wanting more? It’s time to ask the question. Because now, you’ve got options.
Terminal Blocks For Push In Connection Systems
This innovative push-in connection system enables time savings of up to 50%, whether you're wiring control panels or managing complex installations
Electrical Protection in the Solar Era: How to Choose Fuses for Modern Photovoltaic Installations
Solar energy has become a pillar of the global energy transition. The experts at OEM Automatic have broken down the role of photovoltaic fuses and their contribution to solar systems, as well as, how to choose the right solution for you.
Fuse links for semiconductor protection
Ultra fast-acting fuse links engineered specifically to shield delicate semiconductor devices.
Lightning and surge protection for DC and control signals
Do you need reliable protection for measuring and control equipment? DEHN YellowLine delivers voltage surge protection tailored for building, measuring, and control systems
MCBs vs ECBs: Which is best for securing DC circuits?
Choosing the right circuit breaker is important for protecting DC circuits. Two primary forms of protection are MCBs and ECBs. The experts at OEM Automatic breakdown the two circuit breakers for you!
