West - P6010 and P8010 panel indicator

Features:

Output configuration

Up to 4 total. Max 3 single/1 dual relay, max 1 retransmit of PV, max 1 transmitter power supply

Alarms

Up to 5. Process high low or logical OR (direct or reverse acting). With adjustable hysteresis

Viewable Values

Process variable, maximum value, minimum value and alarm 1 elapsed time since reset

Human interface

3 button operation, 4 digit 10mm (6010) or 13mm (8010) high red or green display,
plus 3 alarm 1 max and 1 min indicator

PC configuration

Off-line configuration from PC serial port to dedicated config socket (comms option not required).
Configuration Software for Windows 98 or higher. West Part Number: PS1-CON

Input:

Thermocouple

J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%.

RTD

3 Wire PT100, 50Ω per lead maximum (balanced)

DC linear

0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V.
Scaleable -1999 to 9999, with adjustable decimal point

Impedance

>10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges

Accuracy

±0.1% of input range ±1 LSD (T/C CJC better than 1°C)

Sampling

4 per second, 14 bit resolution approximately

Outputs & Options:

Single alarm relays

Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations. Latching or non-latching

Dual alarm relays

Two x SPST contacts with shared common.
2 Amp resistive at 240V AC, >200,000 operations.
Latching or non-latching

SSR driver outputs

Drive capability >10V DC in 500 minimum

Triac outputs

0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz

DC linear retransmit outputs

0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min.
Accuracy ±0.25% at 250Ω (degrades linearly to 0.5% for increasing burden to specified limits)

Transmitter power supply

Output 24VDC (nominal) into 910Ω minimum to power external devices

Serial communications

2 Wire RS485, 1200 to 19200 Baud, Modbus and ASCII protocol (selectable)

Digital input

External reset of latched relay, stored alarm 1 elapsed time, stored min/max PV values
or initiate tare function. Volt free or TTL input

Operating & Environmental:

Temperature & RH

0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing

Power supply

100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts)

Front panel protection

IEC IP66 (Behind panel protection is IP20)

Standards

CE, UL & ULC recognised. Pollution Degree 2, Installation Category II

Input
Jumper-free configuration for any type (no extra parts required)

Option Slot 1

Part Number

Relay output

PO1-C10

Linear mA/V DC Output

PO1-C21

SSR Driver Output

PO1-C50

Triac Output

PO1-C80

Option Slot 2

Part Number

Relay Output

PO2-C10

Dual Relay Output

PO2-W09

Linear mA/V DC Output

PO2-C21

SSR Driver Output

PO2-C50

Triac Output

PO2-C80

Option Slot 3

Part Number

Relay output

PO2-C10

Linear mA/V DC Output

PO2-C21

SSR Driver Output

PO2-C50

24VDC Transmitter PSU

PO2-W08

Option Slot A

Part Number

Digital Input

PA1-W03

RS485 Comms

PA1-W06