LUMEL
P20 Signal Transducer
Temperature and Standard Signals
The P20 transducer converts temperature, resistance, voltage from shunts and standard signals into a constant-current or constant-voltage signal. The output signal is galvanically insulated from the input signal and supply. Additional features of this transducer include eCon software using the PD14 programmer. The P20 transducer is designed to be mounted on a 35mm rail according to EN 60715.
Technical data and more information can be found below.
- Temperature, resistance, voltage or current input (programmable)
- 0>10V or 4>20mA Output
- Wide voltage, AC/DC control
Selected variant
Technical data
| Connection type | Screw |
|---|---|
| Galvanic isolation | 3-way |
| Input | -20-20 mA, -10-10 V, mV, PT sensors, Thermocouples J, K, S, N |
| Manual switch | No |
| Mounting | DIN-Rail |
| Output | 0-20 mA |
| Status indication | Green / red diode |
| Storage temperature max | 85 °C |
| Storage temperature min | -25 °C |
|---|---|
| Supply voltage | 110-240 V AC/DC |
| Temperature operational max | 55 °C |
| Temperature operational min | -20 °C |
| Type of converter | Analogue & temperature - analogue |
| Weight | 125 g |
| Width | 22,5 mm |
Product description
The P20 transducer converts temperature, resistance, voltage from shunts and standard signals into a constant-current or constant-voltage signal. The output signal is galvanically insulated from the input signal and supply. Additional features of this transducer include eCon software using the PD14 programmer. The P20 transducer is designed to be mounted on a 35mm rail according to EN 60715.
Technical data and more information can be found below.
Ordering information
Please refer to the data sheet for ordering keys and contact us for more information.
