Programmable transducer P30P is suited for single-phase power line parameters measurement and converting them into standard dc current or dc voltage signal. Output signal is galvanically isolated from input signal and power signal. Transducer uses 2 x 8 characters LCD.
Transducer allows for the use of external transmission and measurement conversion included in the measurement and calculation of all measured values. Refresh time does not exceed 1 second. All values and configuration parameters are available through RS-485 and Ethernet (Modbus protocol) (option).
1-phase power network parameters fixed, 1A (X/1A), 5A (X/5A),100 V(x/100 V) or 250 V
1 x analog 0/4...20 mA or 0...10 V
1 x relay NO optionally exchangable with additional analog output 0/4...20 mA or 0...10 V
1 x additonal NO relay optionally exchangable with 24 V, 30 mA supplying output
RS-485 Modbus (Slave or Master) - standard
Ethernet 10/100 Base-T - option
LCD 2 x 8 characters with LED backlight
85...253 V a.c. , 85...300 V d.c or 24…40 Vav, 20…60 V dc
45 x 120 x 100 mm
using buttons or free eCon software using RS-485 Modbus, Ethernet (option)
alarms indicated on the display; internal memory 534336 samples; WWW server, FTP, ModbusTCP/IP Slave (option); data logging in internal memory or on SD card (option); rescaling (up to 21 points); memory of min. and max. values (with time stamp); mathematic functions independent for both inputs; memory of min and max values
100V, 4-20mA,Standard,RA1, 5A,RA1, 5A,20-60V dc,