PULS
FIEPOS eFuse 3-phase
3x 380-480 V AC/24-28 V DC, 300 or 500 W
The FPS300 is an industrialgrade power supply for 3-phase networks and is incorporated in a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that are galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
- Decentralized Power Supply
- Up to 4 switchable outputs
- Output power 360/600 W
- 600/1000 Wpeak 5s
- IP54, IP65/IP67
Selected variant
Technical data
Input data |
|
|---|---|
| Input voltage ac | 380-480 |
| Input voltage ac min | 323 V AC |
| Input voltage ac max | 552 V AC |
| Inrush current at 400 V ac typical | 2 A |
| Power factor at 400 V ac, full load. Typical | 0,9 |
| Number of phases | 3 |
Output data |
|
| Output voltage | 24 V DC |
| Output voltage min | 24 V DC |
| Output voltage max | 28 V DC |
| Output current | 12,5 A |
| Output current max | 25 A |
| Power | 300 W |
Efficiency / Lifetime / MTBF |
|
| Efficiency at 400 V ac, typical | 93,5 % |
| Efficiency at 400 V ac, full load, typical | 95,1 % |
| Lifetime at 400 V ac, full load and +40 ° C | 312000 h |
| MTBF (IEC 61709) 400 V ac, max loan, +40 °C | 625000 h |
Dimensions |
|
| Width | 182 mm |
| Height | 272 mm |
| Depth | 70 mm |
| Weight | 1,55 kg |
Other |
|
|---|---|
| Approvals | CB, CE, cULus, NEC Class 2 |
| Hold time at 400 V ac, typical full load | 25 ms |
| IP class | IP54 |
| Material protection | Aluminium |
| Supply frequency | 50-60 Hz ±6 % |
| Ripple max | 100 mV pp |
| Series | FIEPOS eFuse |
| Power consumption at 400 V ac | 0,53 A |
| Temperature min without derating | -25 °C |
| Temperature max without derating | 55 °C |
| Output connectors | 4x M12-A |
| Total output power <+55°C | 300 W |
| Total output power <+70°C | 150 W |
| Total output power <1 s | 600 W |
| Total output power <1 min | 450 W |
| Power drop from +55 °C to + 70 °C | 6 W/°C |
| Active Transient | Yes |
| Back-feeding loads | 35V / 4,3 J |
| DC relay output | Yes |
| DC-OK/IO-link connector | M12-A |
| Input connector | HAN Q5/0 |
| IO-LINK | No |
| Max. Current per output | 3,9 A |
Product description
The FPS300 is an industrialgrade power supply for 3-phase networks and is incorporated in a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that are galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
Related
Optimise your production line with sensors
Optimise your production line with encoders, inclinometers, displays and slip rings
Every angle covered with 90 degree cable entry system
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller ever on limited time discount
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
11 questions to get the right signalling device – a whitepaper
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
Control Box Assembly for Industrial Electricity Metering - A case study
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
Safeguard systems with DC circuit protection
This blog talks all things DC circuit protection including the key components: electronic circuit breakers, fuses and current monitoring devices. As well as how to choose the right protection.
