PULS
FIEPOS eFuse 1-phase
100-240 V AC/24-28 V DC, 300 and 500 W
The FPS300 is an industrialgrade power supply for 1-phase networks incorporated in to a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that is galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
- Decentralized Power Supplies
- Up to 4 switchable outputs
- Output power 360/600 W
- 600/1000 Wpeak 5s
- IO-Link or DC-OK relay, IP65/67
Selected variant
Technical data
Input data |
|
|---|---|
| Input voltage ac | 100-240 V |
| Input voltage ac min | 85 V AC |
| Input voltage ac max | 264 V AC |
| Input voltage dc | 110-300 V |
| Input voltage dc min | 88 V DC |
| Input voltage dc max | 360 V DC |
| Inrush current at 120 V ac typical | 3 A |
| Inrush current at 230 V ac typical | 6 A |
| Power factor at 120 V ac, full load. Typical | 0.99 |
| Power factor at 230 V ac, full load. Typical | 0.97 |
| Number of phases | 1 |
Output data |
|
| Output voltage | 24 V DC |
| Output voltage min | 24 V DC |
| Output voltage max | 28 V DC |
| Output current per channel | 10 A |
| Power | 300 W |
Efficiency / Lifetime / MTBF |
|
| Efficiency at 120 V ac, full load, typical | 94.3 % |
| Efficiency at 230 V ac, typical | 94.6 % |
| Efficiency at 230 V ac, full load, typical | 95.7 % |
Dimensions |
|
| Width | 182 mm |
| Height | 183 mm |
| Depth | 59 mm |
| Weight | 1.2 kg |
Other |
|
|---|---|
| Approvals | CB, CE, UKCA, cULus |
| Hold time at 120 V ac, typical full load | 37 ms |
| Hold time at 230 V ac, typical full load | 37 ms |
| IP class | IP65, IP67 |
| Material protection | Aluminium |
| Supply frequency | 50-60 Hz ±6 % |
| Ripple max | 50 mV pp |
| Series | FIEPOS eFuse |
| Power consumption 120 V ac | 3.2 A |
| Power consumption 230 V ac | 1.68 A |
| Temperature min without derating | -25 °C |
| Temperature max without derating | 55 °C |
| Output connectors | 1x 7/8" |
| Total output power <+45°C | 360 W |
| Total output power <+55°C | 300 W |
| Total output power <+70°C | 150 W |
| Total output power <5 s, <+55°C | 600 W |
| Total output power <5 s, <+70°C | 300 W |
| Power drop from +55 °C to + 70 °C | 10 W/°C |
| Active Transient | Yes |
| Back-feeding loads | 35V / 4 J |
| DC relay output | No |
| DC-OK/IO-link connector | M12-A |
| Input connector | 7/8" |
| IO-LINK | Yes |
Product description
The FPS300 is an industrialgrade power supply for 1-phase networks incorporated in to a rugged wall- mount housing with IP65/67 protection.
It provides two to four stabilized outputs that is galvanically separated from the input.
The negative potential of the outputs is permanently connected to PE within the unit.
The most outstanding features of the FPS series are the compact size, the wide operational temperature range, the extremely low input inrush current and the very high efficiencies, which are achieved by various design technologies.
Large sized output capacitors can absorb and store regenerative energy from breaking motors.
