CONTA-CLIP

Distribution blocks CU SVB

SVB

The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery.

 

The SVB blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing.

 

Read more
  • High short-circuit resistance rating
  • IP20-class protection
  • 1000VAC / 1500VDC rated
  • TS 35 din rail or direct mounting
  • Housing made from polyamide 6.6 UL 94-V0

Selected variant

CONTA-CLIP

Save page as PDF

Technical data / Documents

Product description

Accessories & Related products

Selected variant

Technical data

General Data
Rated current copper 160 A
Rated voltage V AC 690 V AC
Rated voltage V DC 690 V DC
Mounting TS 35 and direct mount
Overvoltage category III
Rated impulse voltage 2,5 kV
Contamination degree 3
Colour Light grey
Short-circuit current resistance IPK (peak value) 30 kA
Short-circuit current resistance ICW over 1s 11,8 kA

Connection Data
Connections 3 x 8
Number of inputs A 3 x 1
Input A: rated cross-section 35 mm²
Input A: diameter 9 mm
Input A: wire cross-section rigid, min. 6 mm²
Input A: wire cross-section rigid, max. 35 mm²
Input A: wire cross-section stranded, min. 6 mm²
Input A: wire cross-section stranded, max. 25 mm²
Input A: wire cross-section with wire-end ferrules, min. 6 mm²
Input A: wire cross-section with wire-end ferrules, max. 25 mm²
Input A: stripping length 18 mm
Input A: screw thread M 5
Input A: screw head Slotted / Phillips
Input A: torque, min. 1,5 Nm
Input A: torque, max. 3 Nm
Number of inputs B 3 x 5
Input B: rated cross-section 6 mm²
Input B: diameter 5 mm
Input B: wire cross-section rigid, min. 1,5 mm²
Input B: wire cross-section rigid, max. 6 mm²
Input B: wire cross-section stranded, min. 1,5 mm²
Input B: wire cross-section stranded, max. 6 mm²
Input B: wire cross-section, stranded with wire-end ferrules, min. 1,5 mm²
Input B: wire cross-section stranded with wire-end ferrules, max. 6 mm²
Input B: stripping length 12 mm
Input B: screw thread M 4
Input B: screw head Slotted / Phillips
Input B: torque, min. 0,8 Nm
Input B: torque, max. 1,5 Nm
Number of inputs C 3 x 2
Input C: rated cross-section 16 mm²
Input C: diameter 7 mm
Input C: wire cross-section rigid, min. 4 mm²
Input C: wire cross-section rigid, max. 16 mm²
Input C: wire cross-section stranded, min. 4 mm²
Input C: wire cross-section stranded, max. 10 mm²
Input C: wire cross-section, stranded with wire-end ferrules, min. 4 mm²
Input C: wire cross-section, stranded with wire-end ferrules, max. 10 mm²
Input C: stripping length 18 mm
Input C: screw threading M 5
Input C: screw head Slotted / Phillips
Input C: torque, min. 1,5 Nm
Input C: torque, max. 3 Nm
Number of outputs A 1
Output A: rated cross-section 35 mm²

*Invisible Heading*
Output A: diameter 9 mm
Output A: wire cross-section rigid, min. 6 mm²
Output A: wire cross-section rigid, max. 35 mm²
Output A: wire cross-section stranded, min. 6 mm²
Output A: wire cross-section stranded, max. 25 mm²
Output A: wire cross-section stranded with wire-end ferrules, min. 6 mm²
Output A: wire cross-section stranded with wire-end ferrules, max. 25 mm²
Output A: stripping length 18 mm
Output A: screw thread M 5
Output A: screw head Slotted / Phillips
Output A: torque, min. 1,5 Nm
Output A: torque, max. 3 Nm
Number of outputs B 4
Output B: rated cross-section 6 mm²
Output B: diameter 5 mm
Output B: wire cross-section rigid, min. 1,5 mm²
Output B: wire cross-section rigid, max. 6 mm²
Output B: wire cross-section stranded, min. 1,5 mm²
Output B: wire cross-section stranded, max. 6 mm²
Output B: wire cross-section stranded with wire-end ferrules, min. 1,5 mm²
Output B: wire cross-section stranded with wire-end ferrules, max. 6 mm²
Output B: stripping length 12 mm
Output B: screw threading M 4
Output B: screw head Slotted / Phillips
Output B: torque, min. 0,8 Nm
Output B: torque, max. 1,5 Nm
Number of outputs C 6
Output C: rated cross-section 16 mm²
Output C: diameter 7 mm
Output C: wire cross-section rigid, min. 4 mm²
Output C: wire cross-section rigid, max. 16 mm²
Output C: wire cross-section stranded, min. 4 mm²
Output C: wire cross-section stranded, max. 10 mm²
Output C: wire cross-section stranded with wire-end ferrules, min. 4 mm²
Output C: wire cross-section stranded with wire-end ferrules, max. 10 mm²
Output C: stripping length 18 mm
Output C: screw thread M 5
Output C: screw head Slotted / Phillips
Output C: torque, min. 1,5 Nm
Output C: torque, max. 3 Nm
Special connections Neutral conductor busbar

Dimensions
Length 74 mm
Height 50 mm
Height TS 35/7.5 53 mm
Width 98 mm

Materials
Insulation material Polyamide 6.6
Flammability class UL94-V0
Operating temperature to 120 °C
Operating temperature from -40 °C

Additional Data
Tariff code 85369010
Country of origin EEC
Weight 315,4 g
Pack size 1

Downloads

Product description

The SVB screw-type distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery.

 

The SVB blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing.

 

Accessories

Related

Klauke crimping stripping and punching tools
Product news

Efficient crimping, punching and stripping

Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors

electro pneumatic control box customised bespoke solutions
Case studies

Case Study - Electro Pneumatic Control Box

At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box. 

Flexa e mobility cable protection, conduits and cable sleeves
Knowledge

Cable Protection For Emobility

To promote constant and reliable performance, as well as a longer life of parts in the vehicle, it is important to consider the right cable protector.

Katko switch disconnectors
Product news

Switch disconnectors without compromise

We have now added switch disconnectors to our range! Switch disconnectors contribute to the overall functionality and safety of electrical systems.

Lutz loccbox mini circuit breaker
Product news

Electronic Circuit Breaker - LoccBox

LOCC-Box from Lutze is an intelligent current monitoring device that provides reliable protection of DC circuits in a slimline 8.1mm housing.

Push In Technology such as push-in terminals, push-in sockets, and even push-in heaters.
Blog

The Push In Technology You Need at OEM Automatic

OEM Automatic has integrated push-in technology into it's product offering for many years now. In this blog post, we'll explore the various benefits of push-in technology and some of the products we offer that make use of this innovation, such as push-in terminals, push-in sockets, and even push-in heaters.

Parts Rated current copper Rated voltage V AC Rated voltage V DC Approvals Colour Short-circuit current resistance IPK (peak value) Short-circuit current resistance ICW over 1s Additional information Connections Number of inputs A Input A: rated cross-section Input A: diameter Input A: wire cross-section rigid, min. Input A: wire cross-section rigid, max. Input A: wire cross-section stranded, min. Input A: wire cross-section stranded, max. Input A: wire cross-section with wire-end ferrules, min. Input A: wire cross-section with wire-end ferrules, max. Input A: stripping length Input A: screw thread Input A: screw head Input A: torque, min. Input A: torque, max. Number of inputs B Input B: rated cross-section Input B: diameter Input B: wire cross-section rigid, min. Input B: wire cross-section rigid, max. Input B: wire cross-section stranded, min. Input B: wire cross-section stranded, max. Input B: wire cross-section, stranded with wire-end ferrules, min. Input B: wire cross-section stranded with wire-end ferrules, max. Input B: stripping length Input B: screw thread Input B: screw head Input B: torque, min. Input B: torque, max. Number of inputs C Input C: rated cross-section Input C: diameter Input C: wire cross-section rigid, min. Input C: wire cross-section rigid, max. Input C: wire cross-section stranded, min. Input C: wire cross-section stranded, max. Input C: wire cross-section, stranded with wire-end ferrules, min. Input C: wire cross-section, stranded with wire-end ferrules, max. Input C: stripping length Input C: screw threading Input C: screw head Input C: torque, min. Input C: torque, max. Number of outputs A Output A: rated cross-section Output A: diameter Output A: wire cross-section rigid, min. Output A: wire cross-section rigid, max. Output A: wire cross-section stranded, min. Output A: wire cross-section stranded, max. Output A: wire cross-section stranded with wire-end ferrules, min. Output A: wire cross-section stranded with wire-end ferrules, max. Output A: stripping length Output A: screw thread Output A: screw head Output A: torque, min. Output A: torque, max. Number of outputs B Output B: rated cross-section Output B: diameter Output B: wire cross-section rigid, min. Output B: wire cross-section rigid, max. Output B: wire cross-section stranded, min. Output B: wire cross-section stranded, max. Output B: wire cross-section stranded with wire-end ferrules, min. Output B: wire cross-section stranded with wire-end ferrules, max. Output B: stripping length Output B: screw threading Output B: screw head Output B: torque, min. Output B: torque, max. Number of outputs C Output C: rated cross-section Output C: diameter Output C: wire cross-section rigid, min. Output C: wire cross-section rigid, max. Output C: wire cross-section stranded, min. Output C: wire cross-section stranded, max. Output C: wire cross-section stranded with wire-end ferrules, min. Output C: wire cross-section stranded with wire-end ferrules, max. Output C: stripping length Output C: screw thread Output C: screw head Output C: torque, min. Output C: torque, max. Special connections Length Height Height TS 35/7.5 Width UL overvoltage protection - req. Series fuse class J UL test standard cUL test standard UL SCCR rating EAC test standard Req. series fuse class J Rated current cUL Rated voltage cUL SCCR rating Rated voltage UL Rated current UL Country of origin Weight Price
SVB 80 LG
SVB 80 LG
Art:
1740.0 Copied
80 A
1000 V AC
1500 V DC
UL, cUL, EAC
Light grey
2,7 kA
1,9 kA
7
1
16 mm²
7 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
2
16 mm²
7 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
4
6 mm²
4,5 mm
2,5 mm²
6 mm²
2,5 mm²
6 mm²
2,5 mm²
6 mm²
12 mm
M 4
Slotted / Phillips
0,8 Nm
1,5 Nm
66 mm
47 mm
50 mm
27 mm
80 A
UL 1059
C22.2 No 158
100 kA
TR ZU 004/2011
80 A
80 A
600 V
100 kV
600 V
80 A
FR
61,4 g
SVB 80 BU
Art:
1740.5 Copied
80 A
1000 V AC
1000 V DC
UL, cUL, EAC
Blue
2,7 kA
1,9 kA
lid printed blue
7
1
16 mm²
7 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
2
16 mm²
7 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
4
6 mm²
4,5 mm
2,5 mm²
6 mm²
2,5 mm²
6 mm²
2,5 mm²
6 mm²
12 mm
M 4
Slotted / Phillips
0,8 Nm
1,5 Nm
66 mm
47 mm
50 mm
27 mm
80 A
UL 1059
C22.2 No 158
100 kA
TR ZU 004/2011
80 A
80 A
600 V
100 kV
600 V
80 A
FR
61,4 g
SVB 125 LG
SVB 125 LG
Art:
1741.0 Copied
125 A
1000 V AC
1500 V DC
UL, cUL, EAC
Light grey
30 kA
4,2 kA
8
1
35 mm²
10 mm
10 mm²
35 mm²
10 mm²
35 mm²
10 mm²
35 mm²
16 mm
M 8
Allen key
3,5 Nm
5 Nm
1
16 mm²
7 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
15 mm
M 6
Allen key
3,5 Nm
5 Nm
6
16 mm²
6,5 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 5
Slotted / Phillips
2 Nm
3 Nm
75 mm
47 mm
50 mm
27 mm
125 A
UL 1059
C22.2 No 158
100 kA
TR ZU 004/2011
125 A
115 A
600 V
100 kV
600 V
115 A
FR
136,6 g
SVB 175, Distribution block 175A
SVB 175, Distribution block 175A
Art:
1742.0 Copied
175 A
1000 V AC
1500 V DC
UL, cUL, EAC
Light grey
30 kA
11 kA
11
1
70 mm²
12 mm
16 mm²
70 mm²
16 mm²
70 mm²
16 mm²
70 mm²
16 mm
M 10
Allen key
6 Nm
10 Nm
10
16 mm²
6,5 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 6
Allen key
3 Nm
4 Nm
71 mm
43 mm
46 mm
45 mm
UL 1059
C22.2 No 158
TR ZU 004/2011
125 A
175 A
600 V
100 kV
600 V
175 A
FR
221 g
SVB 250, Distribution block 250A
SVB 250, Distribution block 250A
Art:
1743.0 Copied
230 A
1000 V AC
1500 V DC
UL, EAC
Light grey
51 kA
24,5 kA
12
1
120 mm²
15 mm
35 mm²
120 mm²
35 mm²
95 mm²
35 mm²
95 mm²
29 mm
M 14
Allen key
19 Nm
21 Nm
2
35 mm²
9 mm
6 mm²
35 mm²
6 mm²
25 mm²
6 mm²
25 mm²
12 mm
M 8
Slotted
3,5 Nm
7 Nm
5
16 mm²
6,5 mm
1,5 mm²
16 mm²
1,5 mm²
16 mm²
1,5 mm²
16 mm²
12 mm
M 6
Slotted
2 Nm
3 Nm
4
10 mm²
6 mm
1,5 mm²
10 mm²
1,5 mm²
10 mm²
1,5 mm²
10 mm²
12 mm
M 6
Slotted
2 Nm
3 Nm
96 mm
50 mm
53 mm
44 mm
250 A
UL 1059
100 kA
TR ZU 004/2011
250 A
100 kV
600 V
230 A
FR
435,2 g
SVB 400, Distribution block 400A
SVB 400, Distribution block 400A
Art:
1744.0 Copied
400 A
1000 V AC
1500 V DC
UL, EAC
Light grey
51 kA
21 kA
12
1
185 mm²
19 mm
95 mm²
185 mm²
95 mm²
150 mm²
95 mm²
150 mm²
29 mm
M 16
Allen key
25 Nm
27 Nm
2
35 mm²
9 mm
6 mm²
35 mm²
6 mm²
25 mm²
6 mm²
25 mm²
12 mm
M 8
Slotted
3,5 Nm
7 Nm
5
16 mm²
6,5 mm
1,5 mm²
16 mm²
1,5 mm²
16 mm²
1,5 mm²
16 mm²
12 mm
M 6
Slotted
2 Nm
3 Nm
4
10 mm²
6 mm
1,5 mm²
10 mm²
1,5 mm²
10 mm²
1,5 mm²
10 mm²
12 mm
M 6
Slotted
2 Nm
3 Nm
96 mm
50 mm
53 mm
44 mm
350 A
UL 1059
100 kA
TR ZU 004/2011
350 A
100 kV
600 V
310 A
FR
405 g
SVB 175/3, 3-Phase distribution block 250A
SVB 175/3, 3-Phase distribution block 250A
Art:
1745.0 Copied
160 A
1000 V AC
1500 V DC
UL, cUL, EAC
Light grey
30 kA
11 kA
3 x 7
3 x 1
70 mm²
12 mm
16 mm²
70 mm²
16 mm²
50 mm²
16 mm²
50 mm²
16 mm
M 10
Allen key
6 Nm
10 Nm
3 x 6
16 mm²
6,5 mm
2,5 mm²
16 mm²
2,5 mm²
10 mm²
2,5 mm²
10 mm²
12 mm
M 6
Allen key
3 Nm
4 Nm
71 mm
43 mm
46 mm
80 mm
UL 1059
C22.2 No 158
TR ZU 004/2011
175 A
175 A
600 V
100 kV
600 V
175 A
FR
389,4 g
SVB 160, Distribution block 160A
SVB 160, Distribution block 160A
Art:
1746.0 Copied
175 A
1000 V AC
1500 V DC
UL, cUL, EAC
Light grey
30 kA
11 kA
7
1
70 mm²
13 mm
10 mm²
70 mm²
10 mm²
70 mm²
10 mm²
70 mm²
18 mm
M 10
Allen key
5 Nm
6 Nm
6
16 mm²
7 mm
2,5 mm²
16 mm²
2,5 mm²
16 mm²
2,5 mm²
16 mm²
12 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
Busbar 16 x 5mm
92 mm
50 mm
54 mm
35 mm
UL 1059
C22.2 No 158
TR ZU 004/2011
175 A
160 A
600 V
100 kV
600 V
160 A
FR
243,8 g
SVB 125/4, 3-Phase distribution block 125A
SVB 125/4, 3-Phase distribution block 125A
Art:
1747.0 Copied
160 A
690 V AC
690 V DC
Light grey
30 kA
11,8 kA
3 x 8
3 x 1
35 mm²
9 mm
6 mm²
35 mm²
6 mm²
25 mm²
6 mm²
25 mm²
18 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
3 x 5
6 mm²
5 mm
1,5 mm²
6 mm²
1,5 mm²
6 mm²
1,5 mm²
6 mm²
12 mm
M 4
Slotted / Phillips
0,8 Nm
1,5 Nm
3 x 2
16 mm²
7 mm
4 mm²
16 mm²
4 mm²
10 mm²
4 mm²
10 mm²
18 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
1
35 mm²
9 mm
6 mm²
35 mm²
6 mm²
25 mm²
6 mm²
25 mm²
18 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
4
6 mm²
5 mm
1,5 mm²
6 mm²
1,5 mm²
6 mm²
1,5 mm²
6 mm²
12 mm
M 4
Slotted / Phillips
0,8 Nm
1,5 Nm
6
16 mm²
7 mm
4 mm²
16 mm²
4 mm²
10 mm²
4 mm²
10 mm²
18 mm
M 5
Slotted / Phillips
1,5 Nm
3 Nm
Neutral conductor busbar
74 mm
50 mm
53 mm
98 mm
EEC
315,4 g

Selected variant

Select a variant in the list

Contact us

If you need any help, you can contact us in one of the following ways:

phone 0116 284 9900

Send an e-mail Send an e-mail

comments Use live chat