CONTA-CLIP
Distribution blocks Au/Cu - SVBA
SVBA
The SVBA screw-distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery. The SVBA blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing. The individual blocks can be simply clicked together using a plastic connecting clip.
The SVBA blocks are suitable for aluminum and copper cables from 1.5 to 500 mm². They can be easily encoded using the exchangeable colour-coded marking plates for the N, PE, phases (plates are included in delivery). In addition, the built-in adjustable phase tag makes it easy to display which phase is applied to the block.
Â
Â
- IP20 protection (SVBA 1100A: IP10)
- Foot base can be snapped on TS 35 DIN rail or suitable for direct mounting
- Built-in adjustable phase marking (not for SVBA 1100A)
- Interchangeable markings for N, PE, DC + etc. (not for SVBA 1100A)
- Suitable for copper and aluminum conductors
Selected variant
Technical data
General Data |
|
|---|---|
| Rated current copper | 80 A |
| Rated current aluminium | 63 A |
| Rated voltage V AC | 1000 V AC |
| Rated voltage V DC | 1500 V DC |
| Mounting | TS 35 and direct mount |
| Approvals | UL |
| Overvoltage category | III |
| Contamination degree | 3 |
| Colour | Dark grey |
| IP class | IP20 |
Connection Data |
|
| Connections | 7 |
| Number of inputs A | 1 |
| Input A: rated cross-section | 25 mm² |
| Input A: diameter | 10,5 mm |
| Input A: wire cross-section rigid, min. | 2,5 mm² |
| Input A: wire cross-section rigid, max. | 25 mm² |
| Input A: wire cross-section stranded, min. | 2,5 mm² |
| Input A: wire cross-section stranded, max. | 25 mm² |
| Input A: wire cross-section with wire-end ferrules, min. | 2,5 mm² |
| Input A: wire cross-section with wire-end ferrules, max. | 25 mm² |
| Input A: stripping length | 20 mm |
| Input A: screw head | Allen key |
| Input A: torque, max. | 3,5 Nm |
| Number of outputs A | 6 |
| Output A: rated cross-section | 10 mm² |
| Output A: diameter | 4,4 mm |
*Invisible Heading* |
|
|---|---|
| Output A: wire cross-section rigid, min. | 2,5 mm² |
| Output A: wire cross-section rigid, max. | 10 mm² |
| Output A: wire cross-section stranded, min. | 2,5 mm² |
| Output A: wire cross-section stranded, max. | 6 mm² |
| Output A: wire cross-section stranded with wire-end ferrules, min. | 2,5 mm² |
| Output A: wire cross-section stranded with wire-end ferrules, max. | 6 mm² |
| Output A: stripping length | 10 mm |
| Output A: screw head | Allen key |
| Output A: torque, max. | 2 Nm |
Dimensions |
|
| Length | 89,5 mm |
| Height | 49 mm |
| Height TS 35/7.5 | 52 mm |
| Width | 36 mm |
Materials |
|
| Insulation material | Polyamide 6.6 |
| Flammability class | UL94-V0 |
| Operating temperature to | 120 °C |
| Operating temperature from | -40 °C |
Approvals |
|
| UL test standard | UL 1953 |
| SCCR rating | 10 kV |
| Rated voltage UL | 1000 V |
Additional Data |
|
| Tariff code | 85369010 |
| Country of origin | EEC |
| Weight | 124 g |
| Pack size | 1 |
Product description
The SVBA screw-distributor block makes it possible to distribute potential and power in a compact space without any additional accessories. You can use the distributor block to establish an electromechanical connection between a wire with a large cross-section and one or more wires with small cross-sections. They can be used in installation and distribution board construction and also in controller construction for machinery. The SVBA blocks are mounted by snapping them on to TS 35 DIN rails. They can also be attached directly to a mounting plate using the screw flange located on the side of the housing. The individual blocks can be simply clicked together using a plastic connecting clip.
The SVBA blocks are suitable for aluminum and copper cables from 1.5 to 500 mm². They can be easily encoded using the exchangeable colour-coded marking plates for the N, PE, phases (plates are included in delivery). In addition, the built-in adjustable phase tag makes it easy to display which phase is applied to the block.
Â
Â
Related
Efficient crimping, punching and stripping
Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.Â
Cable Protection For Emobility
To promote constant and reliable performance, as well as a longer life of parts in the vehicle, it is important to consider the right cable protector.
Switch disconnectors without compromise
We have now added switch disconnectors to our range! Switch disconnectors contribute to the overall functionality and safety of electrical systems.
Electronic Circuit Breaker - LoccBox
LOCC-Box from Lutze is an intelligent current monitoring device that provides reliable protection of DC circuits in a slimline 8.1mm housing.
The Push In Technology You Need at OEM Automatic
OEM Automatic has integrated push-in technology into it's product offering for many years now. In this blog post, we'll explore the various benefits of push-in technology and some of the products we offer that make use of this innovation, such as push-in terminals, push-in sockets, and even push-in heaters.
