Teknomega offer a variety of distribution blocks which are used in terminal board distribution units. These include single blocks and compact blocks permitting the units to range from 40 A up to 400 A.
With various applications the blocks are used in switchboards, automation and command panel boards and distribution panel boards.
Compact distribution blocks
Ranging from 80 A to 400 A and 1 and 3 pole the blocks suit applications where the effective short-circuit current value (Icc eff) is higher than 10 kA.
Each block reaches UL approval standards.
3 Pole Compact Distribution Block - RPT 125
|Nominal insulation voltage||600 V|
|Short-circuit current resistance IPK (peak value)||30 kA|
|Short-circuit current resistance ICW over 1s||4,4 kA|
|Number of inputs A||1|
|Input A: wire cross-section stranded, min.||10 mm²|
|Input A: wire cross-section stranded, max.||35 mm²|
|Input A: wire cross-section with wire-end ferrules, min.||10 mm²|
|Input A: wire cross-section with wire-end ferrules, max.||35 mm²|
|Number of outputs A||6|
|Output A: wire cross-section stranded, min.||2,5 mm²|
|Output A: wire cross-section stranded, max.||16 mm²|
|Output A: wire cross-section stranded with wire-end ferrules, min.||2,5 mm²|
|Output A: wire cross-section stranded with wire-end ferrules, max.||16 mm²|
|Screw type||Galvanized steel screws|
|Length (B)||85 mm|
|Height (A)||75 mm|
|Width (C)||48 mm|