CROUZET CONTROL
Control relay for phase monitoring with voltage regeneration (returned voltage) up to about 98% of the measurement voltage. Adjustable switch at the front for adjustment of correct voltage in 3-phase networks. The switch's position is not registered until the operating voltage is switched on. If the switch position is changed during operation, all LEDs (LED indication) begin to flash but the unit will continue to function normally with the voltage that was set at the most recent power connection. The relay monitors the correct phase sequence between the three phases or whether any phase is lacking.The under-voltage function, which is adjustable between -2 % and -20 %, enables the returned voltage to be measured up to about 98%.This means that if there is a line voltage of 400 V and the relay is set to -2 % under-voltage, the relay will trigger an alarm (the relay output drops out) if the voltage drops below 392 V. Green LED (Un) indicates supply voltage OK. Yellow LED (R) indicates active relay output.
Approvals | CSA, GL, RoHS, UL |
---|---|
Breaking capacity | 5A, 250V AC/DC |
Function | Phase Sequence, Phase Failure, Undervoltage |
IP class connection | IP20 |
IP class housing | IP30 |
Mounting | 35 mm DIN-Rail |
Output | Relay |
Selection of rated voltage | 208, 220, 380, 400, 415, 440, 480 V |
Storage temperature max | 70 °C |
Storage temperature min | -40 °C |
---|---|
Supply voltage | 3 x 208-480V AC |
Temperature operational max | 50 °C |
Temperature operational min | -20 °C |
Time delay alarm | 0,2 s |
Time delay startup | 0,6 s |
Time delay when exceeding the limit value | 0,1-10s |
Weight | 80 g |
Control relay for phase monitoring with voltage regeneration (returned voltage) up to about 98% of the measurement voltage. Adjustable switch at the front for adjustment of correct voltage in 3-phase networks. The switch's position is not registered until the operating voltage is switched on. If the switch position is changed during operation, all LEDs (LED indication) begin to flash but the unit will continue to function normally with the voltage that was set at the most recent power connection. The relay monitors the correct phase sequence between the three phases or whether any phase is lacking.The under-voltage function, which is adjustable between -2 % and -20 %, enables the returned voltage to be measured up to about 98%.This means that if there is a line voltage of 400 V and the relay is set to -2 % under-voltage, the relay will trigger an alarm (the relay output drops out) if the voltage drops below 392 V. Green LED (Un) indicates supply voltage OK. Yellow LED (R) indicates active relay output.
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
Here, our customer requires control boxes for electricity metering systems. We leveraged our expertise to deliver easy-to-install, ready-to-use assemblies. We look forward to creating more of these bespoke control boxes for our customer.
This blog talks all things DC circuit protection including the key components: electronic circuit breakers, fuses and current monitoring devices. As well as how to choose the right protection.
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
To help experience the capabilities of Z+F machines first-hand, we provide an in-depth demonstration and workshop. These sessions will show the machines in action and allow you to understand their features and gain valuable insight into their operation and benefits.