The CR130 is a compact and high performance heat fan.
The heat exchanger prevents condensation and frost, as well as providing evenly distributed internal air temperature in ex. cabinets with electrical / electronic components.
A very suitable application is different types of ticket machines or other service machines (coffee, food, etc.)
which may be placed in an environment where it is important to maintain a good climate.
Heat fan CR130 has a large fan with high air volume that quickly distributes airflow, thus drying the air efficiently.
It has two mounting options in the same device. Either it can be mounted on DIN rail or with screw mounting on the wall.
The design is modern and functional. It is double insulated with a plastic casing, which makes the side surfaces not so hot. Therefore, the heater can be mounted relatively close to other products in the same application and that you do not have to worry about burns. The double insulation also causes the ground heater to escape.
CR 130 950W Fan heater with thermostat, 230V ac, 0…60°C
|Heat output||950 W|
|Nominal voltage||230 V AC|
|Heater body||Aluminium, Plastic|
|Material of body||Aluminium|
|Mounting||DIN-rail, quick mount|
|Number of fans||1|
|Connection type||2-pole screw terminal for 2.5 mm² cable|
|Heat source||Resistor element|
|Recommended fuse (slow blow)||6,3 A|
|Life span||50 000 h @ +25°C|
|Air capacity||160 m³/h|
|Tightening torque for cable||0,8 Nm|
Safety & Approvals
|Protection class||II (double insulated)|
|Approvals||CE, cULus, Gost R, RoHS, UL, UL E234324, VDE|
|Overheating protection||Overheat protection, fan failure with auto-reset|
Rated Operating Conditions
|Operational Temperature||-45°C ... +70°C|
|Storage temperature||-45°C ... +70°C|
|Operating humidity||< 90% RH|
|Humidity storage||<90% RH|
|Control range temperature from||0 °C|
|Control range temperature to||60 °C|
|Fan||Axial fan, ball bearing|
|Voltage max||230 V ac|
|Voltage min||230 V ac|
|Housing||Plastic enclosure, UL94 V-0|
|Country of origin||Germany|