STEGO
Fan Heater 100-400 W HVL031/HV031
The heating source in this fan is a high-power resistor element.
Â
Thanks to the fan, good air circulation is obtained, while at the same time high upward dispersal is achieved. The fan is therefore appropriate for installation in enclosures outdoors to maintain an even temperature and thus avoid condensation, but it can also be used to assure that the temperature is kept above the lowest permitted level.
Â
The fan can even be run separately to increase the air circulation during the summer, for example.
- Quick connector for DIN mounting
- Compact
- UL-approved
- High fan capacity
Selected variant
Technical data
General Data |
|
|---|---|
| Heat output | 100 W |
| Nominal voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Heater body | Aluminium, Plastic |
| Material of body | Die cast aluminium |
| Mounting | Clip on, DIN rail |
| Number of fans | 1 |
| Connection type | 3-pole spring terminal for 2.5 mm² cable (1.5 mm² with end sleeve). Fan connected to screw terminal L2 / N2. |
| Heat source | Resistor element |
| Recommended fuse (slow blow) | 1 A |
| Life span | 50 000 h @ +25 °C |
| Air capacity | 35 m³/h |
Dimensions |
|
| Height | 47 mm |
| Width | 80 mm |
| Depth | 112 mm |
| Weight | 0.6 kg |
Safety & Approvals |
|
|---|---|
| Protection class | I (earthed) |
| IP class | IP20 |
| Approvals | CE, cULus, EAC, RoHS, UL, VDE |
| Flammability class | UL94-V0 |
| Overheating protection | In case of fan failure and overheating |
Rated Operating Conditions |
|
| Temperature 50 mm above the heater | +75 °C |
| Operational temperature | -45°C ... +70°C |
| Storage temperature | -45°C ... +70°C |
| Operating humidity | < 90% RH |
| Humidity storage | <90% RH |
| Voltage min | 230 V ac |
| Plastic cover | Black, UL94 V-0 |
| Voltage max | 230 V ac |
| Material plastic housing | Plastic |
Product description
The heating source in this fan is a high-power resistor element.
Â
Thanks to the fan, good air circulation is obtained, while at the same time high upward dispersal is achieved. The fan is therefore appropriate for installation in enclosures outdoors to maintain an even temperature and thus avoid condensation, but it can also be used to assure that the temperature is kept above the lowest permitted level.
Â
The fan can even be run separately to increase the air circulation during the summer, for example.
Related
Lightning and surge protection for DC and control signals
Do you need reliable protection for measuring and control equipment? DEHN YellowLine delivers voltage surge protection tailored for building, measuring, and control systems
Signal Lights For You
New signal lights from Auer Signal are now available! The first products to be launched in this series are the Smart Dot 50 in the Basic and Standard versions, as well as the Smart Indicator 50 in the Basic version.Â
Optimise your production line with sensors
Optimise your production line with encoders, inclinometers, displays and slip rings
Every angle covered with 90 degree cable entry system
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller ever on limited time discount
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
11 questions to get the right signalling device – a whitepaper
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
