CONTA-CLIP
KDSI-SR Inverted Cable Entry System
KDSI
The inverted KDSI-SR screw frames enable a complete assembly from the outside. Â This is ideal for applications where space inside the panel is limited.
The KDSI-SR follow the same modular assembly principles as the popular KDS-SR, that and be assembled from the inside.
The changes to the inverted versions are the new mirrored geometry of the frame's opening tapers and an additional cover frame, which ensures the tight fit of the sealing elements towards the outside and maintains strain relief to DIN EN 62444
KDSI uses the same cut-outs as the standard Industrial Connector ranges from the manufacturers such as Harting, Walther and Ilme.
Â
It also shares the same inlays and IP66 inserts as the KDS square and round variants.
Â
- Easy assembly from the outside
- Four parts, many solutions
- uses the standard inlays and seals
- Perfect for pre-assembled cables, pipes and tubes
- High IP66 protection
Selected variant
Technical data
General data |
|
|---|---|
| Mounting | Screw on |
| Colour | Black |
| IP class | IP66 |
| Approvals | Pending, cUL, UL |
| NEMA class | 4x Pending |
| Length | 81 mm |
| Width | 64 mm |
| Height | 25,8 mm |
| Installed height | 24,2 mm |
Mounting details |
|
| Length of cutout | 46 mm |
| Width of cutout | 36 mm |
| Number of screw holes | 4 |
| Diameter of the screw holes | 5,5 mm |
| Fixing screws | M5 |
| Torque of the fixing screws | 3 Nm |
Materials |
|
| Material | Polyamide 6.6 |
*Invisible Heading* |
|
|---|---|
| Glass-fibre reinforced | Yes |
| Flammability class | V-0 |
| Sealing material | Polyurethane-based |
| Silicone-free | Yes |
| Halogen-free | Yes |
| Operating temperature from | -40 °C |
| Operating temperature to | 120 °C |
| Approvals | Pending, cUL, UL |
Approvals |
|
| UL test standard | UL 508 |
| cUL test standard | C22.2 No. 14-95 |
Additional data |
|
| Tariff code | 39259020 |
| Country of origin | DE |
| Weight | 59,4 g |
| Pack size | 1 |
Measurements and connections
Product description
The inverted KDSI-SR screw frames enable a complete assembly from the outside. Â This is ideal for applications where space inside the panel is limited.
The KDSI-SR follow the same modular assembly principles as the popular KDS-SR, that and be assembled from the inside.
The changes to the inverted versions are the new mirrored geometry of the frame's opening tapers and an additional cover frame, which ensures the tight fit of the sealing elements towards the outside and maintains strain relief to DIN EN 62444
KDSI uses the same cut-outs as the standard Industrial Connector ranges from the manufacturers such as Harting, Walther and Ilme.
Â
It also shares the same inlays and IP66 inserts as the KDS square and round variants.
Â
