ELECTROMEN

Electromen - EM-324-SPF

DC motor positioning drive 12-24 V dc, 4 A, pulse feedback

EM-324-SPF is a positioning driver to be used with DC-motors. The solid state power stage operates with high efficiency and as its

realized with FET-transistors. Its literally everlasting compared to relay solutions. Feedback is done with one or two line pulse signal.

Although position feedback can be done with one pulse line it is always preferred and more secure to do it with two 0°/90° pulse lines.

This driver includes an analog control with three signal ranges, 0-5,5V, 0-11V or 4-20mA. Input is freely scalable inside the range.

The max. electrical accuracy of the driver and feedback is 0.2% which is adequate for most actuator positioning applications.

The settings and adjustments are done with parameters as in all new generation Electromen products. Included in the parameters

is also the learn routine which will help to determine the full movement range fast and easily. Additively the movement range can be

modified from both ends with SW-limit parameters. Possible cumulating pulse count errors can be avoided with manually or automatically

triggerable home drive. Current limits and driving speeds can be set individually for both directions. Driver includes also many other

dynamic adjustment features like parameter for load compensation, dead-zone setting (positioning window), start and stop ramps for

smooth direction change and braking zone for well operating positioning.

The parameter setting and status monitoring is done with EM-236 Interface Unit. With EM-236 the right parameters can also be

copied easily to other driver units. The on-board LED-light indicates the possible fault situations with blinking codes. If needed,

the fault alarm can be also given out trough combiport (pin. 13). This port can be set as "position OK." output or it can work as

an analog position signal output. Additively it can work also as disable input. Device is EMC tested for industrial and household

environment and operating temperature range is quite wide. There are also same housing options available for EM-324-SPF

driver card as for the standard EM-324.

 

FEATURES

- quadrature pulse counting

- multiple dynamic settings

- solid state power stage

- one or two pulse feedback

- voltage or mA control

- position accuracy max. 0.2%

- versatile setting options

- digitally settable parameters

- housing options available

- 2/16kHz pwm frequncy options

- CE marked product

 

* 4A at 2kHz / 3A at 16kHz

mom. 6A ( Ta<50°C )

Read more
  • 12-24Vdc, 4A continuous, 6A peak
  • Set value 0-5V, 0-11V, 0-20mA & feedback input from encoder/hall sensor
  • Positioning accuracy max. 0.2%
  • Speed, direction, current limiting, soft start/stop and range adjustment control
  • Compact, DIN rail mountable

Selected variant

DC motor positioning drive 12-24 V dc, 4 A, pulse FB

Art:

Selected variant

Technical data

Analogue input 0-5V or 0-11V or 0-20mA
Compatible motor technology DC
Control type Speed, Direction, Torque, Position, Soft start / stop
Current setting range 0.1-6A
Dimensions length x width x height 72x32x25mm mm
Logic input high >4V = ON
Logic input low <1V = OFF
Max continuous current *4 A
Mounting DIN rail
Operating temperature -40°C...+60°C
Peak current 6 A
PWM frequency 2kHz/16kHz
Supply voltage 12 V DC, 24 V DC
Weight 80 g

Measurements and connections

Technical illustrations

Product description

EM-324-SPF is a positioning driver to be used with DC-motors. The solid state power stage operates with high efficiency and as its

realized with FET-transistors. Its literally everlasting compared to relay solutions. Feedback is done with one or two line pulse signal.

Although position feedback can be done with one pulse line it is always preferred and more secure to do it with two 0°/90° pulse lines.

This driver includes an analog control with three signal ranges, 0-5,5V, 0-11V or 4-20mA. Input is freely scalable inside the range.

The max. electrical accuracy of the driver and feedback is 0.2% which is adequate for most actuator positioning applications.

The settings and adjustments are done with parameters as in all new generation Electromen products. Included in the parameters

is also the learn routine which will help to determine the full movement range fast and easily. Additively the movement range can be

modified from both ends with SW-limit parameters. Possible cumulating pulse count errors can be avoided with manually or automatically

triggerable home drive. Current limits and driving speeds can be set individually for both directions. Driver includes also many other

dynamic adjustment features like parameter for load compensation, dead-zone setting (positioning window), start and stop ramps for

smooth direction change and braking zone for well operating positioning.

The parameter setting and status monitoring is done with EM-236 Interface Unit. With EM-236 the right parameters can also be

copied easily to other driver units. The on-board LED-light indicates the possible fault situations with blinking codes. If needed,

the fault alarm can be also given out trough combiport (pin. 13). This port can be set as "position OK." output or it can work as

an analog position signal output. Additively it can work also as disable input. Device is EMC tested for industrial and household

environment and operating temperature range is quite wide. There are also same housing options available for EM-324-SPF

driver card as for the standard EM-324.

 

FEATURES

- quadrature pulse counting

- multiple dynamic settings

- solid state power stage

- one or two pulse feedback

- voltage or mA control

- position accuracy max. 0.2%

- versatile setting options

- digitally settable parameters

- housing options available

- 2/16kHz pwm frequncy options

- CE marked product

 

* 4A at 2kHz / 3A at 16kHz

mom. 6A ( Ta<50°C )

Accessories

Contact us

If you need any help, you can contact us in one of the following ways:

phone 0116 284 9900

Send an e-mail Send an e-mail

comments Use live chat

Logo

Cookie settings for OEM.CO.UK

Cookies help us improve your experience with us, so in order to be able to handle login information, offer you personalised content and for basic functionality of this website, we use some cookies.

We will never sell on any information about you. 

You can accept all cookies or personalise your cookies preferences, you can also change your cookie preferences at any time by visiting our contact page.

Necessary Cookies

These cookies are necessary for the website to work and can not be turned off in our systems. They are usually used only in response to actions you have taken in connection with a service request, for example when setting personal preferences, logging in or filling out a form.

Analysis and measurement cookies

These cookies allow us to count the number of visits and traffic sources so that we can measure and improve our website performance. They help us know which pages are more or less popular and how visitors navigate around the site. The information that these cookies collect is aggregated and therefore completely anonymous. If you do not allow these cookies, we do not know when you have visited our website.

Marketing cookies

These cookies can be added by our partners. They can use them to create a profile of you, based on your interests, to show you more relevant information. They do not store any personal information - only information about your browser and device. If you do not accept these cookies, you will have a more general and less customized user experience.