APLISENS
Aplisens - APRE-2000G Smart differential pressure sensors
The Aplisens APRE-2000G Smart differential pressure transmitter is applicable to gases, to the measurements of their pressure, underpressure and differential pressure.
The ability to select the radical conversion characteristics also enables this differential pressure transmitter to be used in gas flow measurement systems using reduced pipes or other impeding elecments.
The APRE-2000G Smart uses HART protocol and the following metrological parameters can be configured through this:
- Units of pressure
- Start and end-points of the set range
- Damping time constant
- Conversion characteristics (radical, inversion, user's non-linear characteristics)
And through the data interchange with the probe you can also:
- Identify the transmitter
- Read the currently measured hydrostatic pressure value, output current and percenatge of measuring range
This smart differential pressure transmitter has an accuracy of 0.1%, with five standard measuring ranges to choose from and is also available in ATEX.
Application examples:
- Blast pressure
- Chimney draughts
- Furnace chambers
- Clean rooms
- Pressure range -100 mbar to 100 mbar
- Min range 0.2mbar
- Three body styles available
- ATEX version
Selected variant
Technical data
| Connection | 2xØ6mm |
|---|---|
| Deviation max | 0,25 % |
| Electrical connection | DIN EN 175301-803-A |
| IP class | IP65 |
| Manufacturer part no. | APRE2000G/PD/-2,5..2,5/ 0-62,5PA/PCV |
| Material of body | Stainless steel AISI 304 |
| Material of wetted parts | Brass, Stainless steel 316L |
| Pressure range max | 0.625 mbar |
| Pressure range min | 0 mbar |
| Signal type | 4-20 mA / Hart |
|---|---|
| Static pressure | 0.35 bar |
| Supply voltage dc max | 55 V DC |
| Supply voltage dc min | 7.5 V DC |
| Temperature ambient from | -30 °C |
| Temperature ambient to | 85 °C |
| Temperature of media from | -25 °C |
| Temperature of media to | 120 °C |
Product description
The Aplisens APRE-2000G Smart differential pressure transmitter is applicable to gases, to the measurements of their pressure, underpressure and differential pressure.
The ability to select the radical conversion characteristics also enables this differential pressure transmitter to be used in gas flow measurement systems using reduced pipes or other impeding elecments.
The APRE-2000G Smart uses HART protocol and the following metrological parameters can be configured through this:
- Units of pressure
- Start and end-points of the set range
- Damping time constant
- Conversion characteristics (radical, inversion, user's non-linear characteristics)
And through the data interchange with the probe you can also:
- Identify the transmitter
- Read the currently measured hydrostatic pressure value, output current and percenatge of measuring range
This smart differential pressure transmitter has an accuracy of 0.1%, with five standard measuring ranges to choose from and is also available in ATEX.
Application examples:
- Blast pressure
- Chimney draughts
- Furnace chambers
- Clean rooms
Ordering information
Please refer to the image below for ordering information.
Related
Water & Wastewater Solutions
OEM Automatics water and wastewater application specialists have gathered all our solutions in one place. Our products are used in everything from small municipal water works to larger regional plants.
How do I know if I need a pressure switch or a pressure sensor?
When choosing between a pressure switch and a pressure sensor, the key lies in understanding your application. Our Pressure Monitoring experts breaks down the two devices for you.
Select the pressure switch for you a step by step guide
When selecting a SUCO mechanical pressure switch, it's essential to consider several key factors...
Why hydrostatic level probes lie and how to stop it
In this article, our application experts explain why hydrostatic level probes appear to lie, the most common failures, and how OEM, working with Aplisens, can help engineers prevent them.
What is hydrostatic level monitoring?
A hydrostatic level probe measures liquid level indirectly, by sensing pressure at a known depth. When the application is suitable and the installation is done properly, hydrostatic level probes offer several clear benefits.
understanding viscosity - And Why It Matters When Choosing A Pump
Whether you’re pumping water, chocolate, oil or peanut butter knowing the product’s viscosity is essential to selecting the right pump. Find out more about viscosity and which pump may be suitable for your application!
