ELECTROMEN
Electromen - EM-241-SAF
DC motor positioning drive 12-24Vdc, 15A, analogue feedback
EM-241-SAF is a positioning driver to be used with DC-motors. The solid state power stage operates with high efficiency as it is
realized with FET-transistors. Its literally everlasting compared to relay solutions. Control and feedback is done with analog signal.
Control signal can be a voltage in range of 0 to 11V or current from 0 to 20mA. Feedback signal can be in the range from 0 to 11V.
Driver supports also a potentiometer feedback, with auxiliary voltage outputs of 0V and 5,5V to exitate the potentiometer.
The max. accuracy available for positioningof is 0,2% that is adequate for most actuator positioning applications.
The settings and adjustments are done with parameters as in all new generation Electromen products. Movement range can be
modified from both ends with SW-limit parameters. Current limits and driving speeds can be set individually for both directions.
Driver includes also many other dynamic adjustment possibilities like parameters for load compensation, dead-zone setting
(positioning window), start and stop ramps for a smooth direction change and braking zone for well operating positioning.
The parameter setting and status monitoring is done with EM-236 Interface Unit. With EM-236 the right parameters can also be
easily copied to other driver units. The on-board LED-light indicates the possible fault situations with blinking codes. If needed,
the fault can be forwarded trough combiport to other driver cards. Alternatively this port can be set to give out the "position OK"
information or it can even indicate the position with an analog voltage signal. Device is EMC tested for industrial and household
environment and operating temperature range is quite wide.
There are also some housing options available for EM-241-SAF driver card.
FEATURES
- analog feedback
- voltage or mA control
- position accuracy max. 0,2%
- solid state power stage
- small size, great performance
- digitally settable parameters
- verstile dynamic settings
- housing options available
- CE marked
- 12-24Vdc, 15A continuous, 30A peak
- Set value & feedback input, 0-5V, 0-11V, 0-20mA or potentiometer
- Positioning accuracy max. 0.2%
- Speed, direction, current limiting, soft start/stop and range adjustment control
- Compact, DIN rail mountable
Selected variant
Technical data
| Analogue input | 0-5V or 0-11V or 0-20mA |
|---|---|
| Control type | Speed, Direction, Torque, Position, Soft start / stop |
| Current setting range | 0.1-20A |
| Dimensions length x width x height | 72x42x25mm mm |
| Logic input high | >4V = ON |
| Logic input low | <1V = OFF |
| Max continuous current | 15 A |
| Mounting | DIN rail |
| Operating temperature | -40°C...+60°C |
|---|---|
| Peak current | 30 A |
| PWM frequency | 2kHz |
| Suitable engine | DC |
| Supplier | Electromen |
| Supply voltage | 12 V DC, 24 V DC |
| Weight | 80 g |
Product description
EM-241-SAF is a positioning driver to be used with DC-motors. The solid state power stage operates with high efficiency as it is
realized with FET-transistors. Its literally everlasting compared to relay solutions. Control and feedback is done with analog signal.
Control signal can be a voltage in range of 0 to 11V or current from 0 to 20mA. Feedback signal can be in the range from 0 to 11V.
Driver supports also a potentiometer feedback, with auxiliary voltage outputs of 0V and 5,5V to exitate the potentiometer.
The max. accuracy available for positioningof is 0,2% that is adequate for most actuator positioning applications.
The settings and adjustments are done with parameters as in all new generation Electromen products. Movement range can be
modified from both ends with SW-limit parameters. Current limits and driving speeds can be set individually for both directions.
Driver includes also many other dynamic adjustment possibilities like parameters for load compensation, dead-zone setting
(positioning window), start and stop ramps for a smooth direction change and braking zone for well operating positioning.
The parameter setting and status monitoring is done with EM-236 Interface Unit. With EM-236 the right parameters can also be
easily copied to other driver units. The on-board LED-light indicates the possible fault situations with blinking codes. If needed,
the fault can be forwarded trough combiport to other driver cards. Alternatively this port can be set to give out the "position OK"
information or it can even indicate the position with an analog voltage signal. Device is EMC tested for industrial and household
environment and operating temperature range is quite wide.
There are also some housing options available for EM-241-SAF driver card.
FEATURES
- analog feedback
- voltage or mA control
- position accuracy max. 0,2%
- solid state power stage
- small size, great performance
- digitally settable parameters
- verstile dynamic settings
- housing options available
- CE marked
Related
Synchronous Motors
Do you have a light duty motor requirement requiring a very stable output rpm ? If so, Crouzet synchronous motors are could well provide you ideal solution…
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Wheel motor drives for AGVs
AGV drive wheel motors cover a wide range of options – from a miniature unit on a small 20kg robot, tasked to move on a perfectly level and smooth indoor surface, up to passenger vehicle-sized robots working outside over fields and varying terrain.
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
