ELECTROMEN
Electromen - EM-165pf DC motor positioning drive 12-32 V dc, 5 A, pulse FB
EM-165pf is a positioning driver for pulse feedback systems. Potentiometer or direct voltage signal can
be used as control value. The device has inbuild up-down counter and servo amplifier for positioning.
There are four counter ranges: 128, 256, 512 and 1024 pulses. Additionally the range can be fine-tuned.
The power stage of the unit is capable of directly driving a DC-motor. EM-165pf is suitable for example
driving a spindle motor equipped with pulse transducer. EM-165pf is best suited for slow and medium
speed systems with transitional period of 4...50s (from end to end). The current limit is settable and can
be used to limit the torque of the motor. Current trip feature will shut down the driver in fault situation, if
either current is on the limit for over 2s, or if it takes more than 50s to reach the set value. In fault situation
the error output will be activated. Reactivation from the trip situation is done by applying a reverse control
command or by switching power off and back on.
Every time the unit is switched on, it will first drive the mechanism to one end and reset the counter. After this
it will drive the mechanism to control value. Every time the unit receives new control value, it starts the motor
and begins to compare the counter value with control value. When these two start to approach each other, the
controller slows down and finally stops when the values are indentical. Besides using one of the pulse ranges,
the positioning range can be fine tuned with control value range trim. EM-165pf is small in size and can be
mounted into a rail using a rail mounting base or screws. The unit has a self recovery overload protection and
short circuit protection. However the use of an external fuse is recommended.
FEATURES
• Pos. accuracy typ. ±1%
• High efficiency >92%
• For motors 5-200W
• Start- and stop-ramp
• Overload protection
• Error indication
• Control value with pot. or voltage
• 128, 256, 512 ,1024 pulse ranges
• Adjustable current limit
• Rail base mountable
• EMC-tested (CE)
- 12-32 V dc, 5 A continuous, 12 A peak
- Set value 0-5V or potentiometer & feedback from pulse input
- Positioning accuracy. typ. ±1%
- Compact, din rail mountable
Selected variant
Technical data
| Analogue input | 0-5V or 0-10V |
|---|---|
| Control type | Direction, Torque, Position, Soft start / stop |
| Current setting range | 0-12 A |
| Dimensions length x width x height | 73x32x20mm mm |
| Max continuous current | 5 A |
| Mounting | DIN rail |
| Operating temperature | -20°C...+60°C |
| Peak current | 12 A |
|---|---|
| Suitable engine | DC |
| Supplier | Electromen |
| Supply voltage | 12 V DC, 24 V DC |
| Weight | 40 g |
Product description
EM-165pf is a positioning driver for pulse feedback systems. Potentiometer or direct voltage signal can
be used as control value. The device has inbuild up-down counter and servo amplifier for positioning.
There are four counter ranges: 128, 256, 512 and 1024 pulses. Additionally the range can be fine-tuned.
The power stage of the unit is capable of directly driving a DC-motor. EM-165pf is suitable for example
driving a spindle motor equipped with pulse transducer. EM-165pf is best suited for slow and medium
speed systems with transitional period of 4...50s (from end to end). The current limit is settable and can
be used to limit the torque of the motor. Current trip feature will shut down the driver in fault situation, if
either current is on the limit for over 2s, or if it takes more than 50s to reach the set value. In fault situation
the error output will be activated. Reactivation from the trip situation is done by applying a reverse control
command or by switching power off and back on.
Every time the unit is switched on, it will first drive the mechanism to one end and reset the counter. After this
it will drive the mechanism to control value. Every time the unit receives new control value, it starts the motor
and begins to compare the counter value with control value. When these two start to approach each other, the
controller slows down and finally stops when the values are indentical. Besides using one of the pulse ranges,
the positioning range can be fine tuned with control value range trim. EM-165pf is small in size and can be
mounted into a rail using a rail mounting base or screws. The unit has a self recovery overload protection and
short circuit protection. However the use of an external fuse is recommended.
FEATURES
• Pos. accuracy typ. ±1%
• High efficiency >92%
• For motors 5-200W
• Start- and stop-ramp
• Overload protection
• Error indication
• Control value with pot. or voltage
• 128, 256, 512 ,1024 pulse ranges
• Adjustable current limit
• Rail base mountable
• EMC-tested (CE)
Related
Synchronous Motors
Do you have a light duty motor requirement requiring a very stable output rpm ? If so, Crouzet synchronous motors are could well provide you ideal solution…
Recap of IATECH
Did you get a chance to visit IATECH at The Leicester Marriott Hotel? We had over 33 exhibitors and 8 fantastic Tech Talks throughout the day, Read all about the day, here.
OEM introduces IATECH - The Industrial Automation Technology Expo
We are thrilled to announce the launch of IATECH, THe Industrial Automation Technology expo at Leicester Marriott Hotel on 23rd October. The ultimate platform for showcasing our extensive product range and broad business areas, featuring over 50 leading suppliers under one roof!
Automation Components for Specialist Vehicles
The specialist vehicle industry can include automotive and EV, heavy vehicles such as agriculture and rail, and marine. This email takes you through some of the various products we offer for specialist vehicle applications.
Wheel motor drives for AGVs
AGV drive wheel motors cover a wide range of options – from a miniature unit on a small 20kg robot, tasked to move on a perfectly level and smooth indoor surface, up to passenger vehicle-sized robots working outside over fields and varying terrain.
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
