• black icon of a bullhorn 30 years industry experience
  • black icon of three cubes Over 8,000 products in stock
  • Black icon of a clock Order by 16:00 and receive the next working day
ELECTROMEN
ELECTROMEN

Electromen - EM-337-PLI Parallel drive for 4 x DC motors 12-24 V dc, 4x10A

  • 12-24 V dc, 4x8 A continuous, 4x10 A 25% duty
  • Synchronized parallel driving
  • Operates with pulse feedback from motors
  • Homing cycle & end of travel limits set by pulse counting
  • Programmable with wide range of motor control functions

Product description

EM-337 is a parallel synchro controller for up to 4 DC-motors. The controller has four H-bridge power stages. The driver works

with actuators that can offer pulse feedback signal. The control is done with FW / BW commands. The synchronization control will keep all motors in the same speed and position. If synchronous error exceedsthe set difference limit, all motors will be stopped. Device includes adjustable acceleration and deceleration ramps, which produce the smooth starts, stops and direction changes.Load compensation also enables good operation with asymmetric loads. Adjustable current limits can be set to protect motor and mechanics against overcurrent (over sized forces).

 

FEATURES

- synchronized 4 parallel driving

- operates with pulse feedback

- pulse counting PNP or NPN logic

- quadrature pulse counting

- current and temperature limit

- settable drive speed

- 2 or 16kHz pwm frequency

- acceleration and deceleration ramps

- stroke length limitation

- setting with serial interface

- brake ( release ) output

- safety switch input

- optional Rs-485 ( Modbus ) control

- safety reverse function

 

APPLICATIONS

- table lifter

- hatch control

- worktop control

Parts Price

Part

EM-337-PLI

Technical data

Control type Braking, Direction, Soft start / stop, Speed, Torque
Current setting range 1-25 A
Current setting range 1-25A
Dimensions length x width x height 142x73x28mm mm
Logic input high >4V = ON
Logic input low <1V = OFF
Max continuous current 4x8 A
Mounting DIN rail
Operating temperature -40°C...+60°C
Peak current 4x25 A
PWM frequency 2kHz/16kHz
Suitable engine DC
Supplier Electromen
Supply voltage 12 V DC, 24 V DC
Weight 190 g

Measurements and connections

Technical illustrations

Resource

Contact us

If you need any help, you can contact us in one of the following ways:

0116 284 9900

Send an e-mail

Use live chat