The Aplisens APRE-2000G Smart differential pressure transmitter is applicable to gases, to the measurements of their pressure, underpressure and differential pressure.
The ability to select the radical conversion characteristics also enables this differential pressure transmitter to be used in gas flow measurement systems using reduced pipes or other impeding elecments.
The APRE-2000G Smart uses HART protocol and the following metrological parameters can be configured through this:
And through the data interchange with the probe you can also:
This smart differential pressure transmitter has an accuracy of 0.1%, with five standard measuring ranges to choose from and is also available in ATEX.
Please refer to the image below for ordering information.
0..0,625mBar 4-20mA/Hart 2xØ6mm DIN-A
|Deviation max||0,25 %|
|Electrical connection||DIN EN 175301-803-A|
|Manufacturer part no.||APRE2000G/PD/-2,5..2,5/ 0-62,5PA/PCV|
|Material of body||Stainless steel AISI 304|
|Material of wetted parts||Brass, Stainless steel 316L|
|Pressure range max||0,625 mbar|
|Pressure range min||0 mbar|
|Signal type||4-20 mA / Hart|
|Static pressure||0,35 bar|
|Supply voltage dc max||55 V DC|
|Supply voltage dc min||7,5 V DC|
|Temperature ambient from||-30 °C|
|Temperature ambient to||85 °C|
|Temperature of media from||-25 °C|
|Temperature of media to||120 °C|