• black icon of a bullhorn 30 years industry experience
  • black icon of three cubes Over 8,000 products in stock
  • Black icon of a clock Order by 16:00 and receive the next working day
ELECTROMEN
ELECTROMEN

Electromen - EM-239 Parallel drive for 2 x DC motors 12-24 V dc, 2x10A

  • 12-24 V dc, 2x10 A continuous, 2x20 A 25% duty
  • Synchronized parallel driving
  • Operates with pulse feedback from motors
  • Programmable with wide range of motor control functions
  • ** For new projects use EM-339-PLI **

Product description

EM-239 is designed for driving two actuators in parallel. The drive is done as synchronized according actuators pulse feedback signal. The synchronization is achieved by adjusting actuator speed during drive. If the adjustment cannot compensate the unbalance between actuators, the motors will be stopped. This way the mechanical stress and breakage can be avoided. Additively the driver includes current limit and power stage temperature limit. Driver works with actuators that can offer pulse feedback signal. Pulses can be derived from Hall-sensors, reed or other kind of switches. Driver can be set to read negative or positive pulses and also there can be selected two or one pulse line/motor mode. Driver power stage operates with PWM (pulse width modulation), that enables the high efficiency and low losses

of power stage. The basic control is done with FORWARD-, BACKWARD- and STOP-commands. FORWARD and BACKWARD can be done in continuous or in impulse control mode. In continuous mode the drive is done as long the command is on. In impulse mode the command impulses start and stop the driving. For help in assembly and in other special situations, driver has TRIM-inputs for controlling both actuators individually. With these control inputs the user can override most of the limits of normal use and balance the actuators or restore the normal driving position after some unexpected occurrences like

equipment failure or user in danger situation. HOME-command input is for driving the system in to its initial position. This driving is done with low speed and in to the end (in to the initial position). The counters are reset to zero. Wide range of parameters can be set to suit to different demands and different applications. In most cases the driver is ready to work with default parameters but some special features and behaviour can be accomplished with further parameter setting. One new feature is SAFETY REVERSE function, which automatically reversing when motors meet obstacle and will be overloaded

The parameters are set with a handy interface unit EM-236. There is also possibility to use EmenTool Lite PC-software with EM-268 and EmenTool App with smartphones for parameter setting.

 

FEATURES ( program version 1.4 or later )

- synchronized parallel driving

- operates with pulse feedback

- input for negative or positive pulses

- current and temperature limit

- settable drive speed

- acceleration and deceleration ramps

- different control modes

- wide range of parameters

- easy setting with serial interface

- good repeatability of settings

- autobalance feature

- one or double pulse mode

- safety reverse function ( only prog. v2.4 )

Parts Price

Part

EM-239
Parallel drive for 2 x DC motors 12-24 V dc, 2x10A, pulse FB

Technical data

Control type Speed, Direction, Torque, Soft start / stop
Current setting range 1-25 A
Dimensions length x width x height 78x73x25mm mm
Logic input high >4V = ON
Logic input low <1V = OFF
Max continuous current 2x10 A
Mounting DIN rail
Operating temperature -20°C...+60°C
Peak current 2x20 A
PWM frequency 2kHz
Suitable engine DC
Supplier Electromen
Supply voltage 12 V DC, 24 V DC
Weight 110 g

Resource

Contact us

If you need any help, you can contact us in one of the following ways:

0116 284 9900

Send an e-mail

Use live chat