• black icon of a bullhorn 30 years industry experience
  • black icon of three cubes Over 8,000 products in stock
  • Black icon of a clock Order by 16:00 and receive the next working day


Electromen - EM-269A BLDC motor 2Q drive 12-35 V dc, 2 A

  • 12-24 V dc, 2 A continuous, 3 A peak
  • Open & closed loop (hall sensor feedback) control operation
  • Speed, direction, current limiting and soft start/stop control
  • Compact, din rail mountable

Product description

EM-269A is brushless DC-motor driver for motors with hall sensor feedback. The unit has a mosfet power stage with good efficiency

and it meets also todays EMC requirements. The unit has the basic digital command inputs like direction, start/stop, and analog

input for speed control. Device has one NPN output for fault and overcurrent indication use. Indication output functions can be

defined with parameter. The fault situations are also indicated with on-board LED.

There are two control options for speed. Direct control ( open loop ) sets motor voltage in propotion to control voltage as with

a standard DC-motor. Closed loop mode uses hall sensor feedback for speed control. This mode offers good speed regulation.

Start and stop ramps are working in both mode. Speed adjust range, closed loop rpm range and ramps can be set with parameters.

Analog input is filtered, so that also PWM signal of PLC can be used to control speed.

Parameter setting can be done digitally with EM-236 interface unit or with Emen-Tool lite PC-programand EM-268 adapter. There is also

an option to use iPhone with Ementool-APP and EM-326 adapter. The Parameters settinfg are stored into driver's nonvolatile memory .

The parameter interfaces can be also used for motor current monitoring.

Driver card can be installed in DIN-rail base and some enclosure options are also available.



- Three phase output

- Speed adjustment

- Current limit and trip.

- Open/closed loop modes

- Settable Indication output

- Good efficiency

- Low EMC emissions

- DIN-rail mountable


BLDC motor 2Q drive 12-35 V dc, 2 A

Technical data

Analogue input 0-5V or 0-10V
Control type Speed, Direction, Torque, Soft start / stop
Current setting range 0.1-3 A
Dimensions length x width x height 72x32x18mm mm
Logic input high >4V = ON
Logic input low <1V = OFF
Max continuous current 2 A
Mounting DIN rail
Peak current 3 A
PWM frequency 16kHz
Suitable engine BLDC
Supplier Electromen
Supply voltage 12 V DC, 24 V DC
Weight 20 g
Contact us

If you need any help, you can contact us in one of the following ways:

0116 284 9900

Send an e-mail

Use live chat