MINIMOTOR
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 o 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
GEAR UNIT: planetary with hardened steel case with broached precision teeth Class 7. Heat-treated sun and planet gears.
Seal rings in special high-temperature rubber (FKM).
Lubrication with special long-lasting oil.
Rated torque up to 95 Nm.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.
For full motor specifications please see motor only 'DBS' or download literature below.
General Data |
|
---|---|
Nominal speed | 400 rpm |
Nominal torque | 1,9 Nm |
Gear stages | 1 |
Input voltage dc | 24/48 Vdc |
Digital inputs | 2 pnp (24Vdc, 500kHz) , 3 pnp (24Vdc, 7kHz) |
Outputs | 1 NO 2A (42 Vdc) |
Output power | 125 W |
Rated current | 8A@24V/4.2A@48V A |
Nominal overload | 200% x 60 sec |
Motor control algorythm | Sinusoidal brushless with 12Bit single-turn / 20Bit multi-turn absolute encoder |
Nominal output frequency carrier | 4/8/12 kHz |
Electronic brake output | 24Vdc, max 0.5A |
Ambient temperature | -10 … +40°C |
Safety Features |
|
IP class | IP65 |
CE approved | Yes |
Over voltage protection | Yes |
*Invisible Heading* |
|
---|---|
Under voltage protection | Yes |
Overheat protection | Yes |
Memory error protection | Yes |
Polarity reverse protection | Yes |
Overcurrent protection | Yes |
Communication error protection | Yes |
Overload protection | Yes |
Communication |
|
Communication | USB |
Ethercat | Yes |
CanOpen | Yes |
ProfiNET | Yes |
Ethernet IP | Yes |
Modbus RTU | Yes |
PowerLink | Yes |
Ratio | 5:1 |
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 o 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
GEAR UNIT: planetary with hardened steel case with broached precision teeth Class 7. Heat-treated sun and planet gears.
Seal rings in special high-temperature rubber (FKM).
Lubrication with special long-lasting oil.
Rated torque up to 95 Nm.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.
For full motor specifications please see motor only 'DBS' or download literature below.
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Nominal speed | Nominal torque | Gear stages | Input voltage dc | Output power | Rated current | Nominal overload | Ratio | Price | ||
---|---|---|---|---|---|---|---|---|---|---|---|
24/48V dc 600rpm 1.9 Nm
Art:
DBSE 55/50-5
Copied
|
400 rpm
|
1,9 Nm
|
1
|
24/48 Vdc
|
125 W
|
8A@24V/4.2A@48V A
|
200% x 60 sec
|
5:1
|
| ||
24/48V dc 429rpm 2.7 Nm
Art:
DBSE 55/50-7
Copied
|
429 rpm
|
2,7 Nm
|
1
|
24/48 Vdc
|
125 W
|
8A@24V/4.2A@48V A
|
200% x 60 sec
|
7:1
|
| ||
24/48V dc 120rpm 9 Nm
Art:
DBSE 55/50-25
Copied
|
120 rpm
|
9 Nm
|
2
|
24/48 Vdc
|
125 W
|
8A@24V/4.2A@48V A
|
200% x 60 sec
|
25:1
|
| ||
24/48V dc 61rpm 17.7 Nm
Art:
DBSE 55/50-49
Copied
|
61 rpm
|
17,7 Nm
|
2
|
24/48 Vdc
|
125 W
|
8A@24V/4.2A@48V A
|
200% x 60 sec
|
49:1
|
| ||
48V dc 600rpm 3.6 Nm
Art:
DBSE 55/100-5
Copied
|
400 rpm
|
3,6 Nm
|
1
|
48 Vdc
|
235 W
|
6.3 A
|
200% x 60 sec
|
5:1
|
| ||
48V dc 429rpm 5 Nm
Art:
DBSE 55/100-7
Copied
|
429 rpm
|
5 Nm
|
1
|
48 Vdc
|
235 W
|
6.3 A
|
200% x 60 sec
|
7:1
|
| ||
48V dc 120rpm 17 Nm
Art:
DBSE 55/100-25
Copied
|
120 rpm
|
17 Nm
|
2
|
48 Vdc
|
235 W
|
6.3 A
|
200% x 60 sec
|
25:1
|
| ||
48V dc 61rpm 33.2 Nm
Art:
DBSE 55/100-49
Copied
|
61 rpm
|
33,2 Nm
|
2
|
48 Vdc
|
235 W
|
6.3 A
|
200% x 60 sec
|
49:1
|
| ||
48V dc, 600rpm, 5nm, 345 W
Art:
DBSE 80/50-5
Copied
|
600 rpm
|
5 Nm
|
1
|
48 Vdc
|
345 W
|
9.9 A
|
150% x 60 sec
|
5:1
|
| ||
48V dc, 429rpm, 7nm, 345 W
Art:
DBSE 80/50-7
Copied
|
429 rpm
|
7 Nm
|
1
|
48 Vdc
|
345 W
|
9.9 A
|
150% x 60 sec
|
7:1
|
| ||
48V dc, 120rpm, 25nm, 345 W
Art:
DBSE 80/50-25
Copied
|
120 rpm
|
25 Nm
|
2
|
48 Vdc
|
345 W
|
9.9 A
|
150% x 60 sec
|
25:1
|
| ||
48V dc, 61rpm, 50nm, 345 W
Art:
DBSE 80/50-49
Copied
|
61 rpm
|
50 Nm
|
2
|
48 Vdc
|
345 W
|
9.9 A
|
150% x 60 sec
|
49:1
|
| ||
48V dc, 600rpm, 10nm, 660 W
Art:
DBSE 80/100-5
Copied
|
600 rpm
|
10 Nm
|
1
|
48 Vdc
|
660 W
|
15.7 A
|
150% x 60 sec
|
5:1
|
| ||
48V dc, 429rpm, 14nm, 660 W
Art:
DBSE 80/100-7
Copied
|
429 rpm
|
14 Nm
|
1
|
48 Vdc
|
660 W
|
15.7 A
|
150% x 60 sec
|
7:1
|
| ||
48V dc, 120rpm, 48nm, 660 W
Art:
DBSE 80/100-25
Copied
|
120 rpm
|
48 Nm
|
2
|
48 Vdc
|
660 W
|
15.7 A
|
150% x 60 sec
|
25:1
|
| ||
48V dc, 61rpm, 95nm, 660 W
Art:
DBSE 80/100-49
Copied
|
61 rpm
|
95 Nm
|
2
|
48 Vdc
|
660 W
|
15.7 A
|
150% x 60 sec
|
49:1
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: