Oriental Motor
Â
Standard induction AC motors from Oriental Motor. Single phase powered, with a friction plate at the rear of the motor for quick stopping and light holding.
Â
Permanent friction allows for a maximum of 30 minute operation before cool down.
Â
Suitable for short term quick stop applications, where the control of a closed loop system is not required.
Â
The single phase motor uses a capacitor for start, with options covering many worldwide voltages.
Â
A three-phase motor connects using an inverter drive, for speed control and high-torque available even at low speeds.
Â
These high-performance motors have little speed reduction even under high loads, ensuring that stable speed control is possible
Â
Suitable for short duty over a long life - typically 10,000 hours+ and with a compact construction, they are used on many applications.
Â
Typical uses
Â
Â
Â
Standard induction AC motors from Oriental Motor. Single phase powered, with a friction plate at the rear of the motor for quick stopping and light holding.
Â
Permanent friction allows for a maximum of 30 minute operation before cool down.
Â
Suitable for short term quick stop applications, where the control of a closed loop system is not required.
Â
The single phase motor uses a capacitor for start, with options covering many worldwide voltages.
Â
A three-phase motor connects using an inverter drive, for speed control and high-torque available even at low speeds.
Â
These high-performance motors have little speed reduction even under high loads, ensuring that stable speed control is possible
Â
Suitable for short duty over a long life - typically 10,000 hours+ and with a compact construction, they are used on many applications.
Â
Typical uses
Â
Â
Automated machinery in the process and packaging industries is constantly developing. Find out how we can help to automate process and packaging machinery at OEM.
After 2 years, OEM are thrilled to announce that we are returning to PPMA this September! Save the dates and visit us on stand A70!
The Mini Motor IP69K, stainless steel product range was designed to conform to guidelines mandated by the E.H.E.D.G. Let’s look into how Mini Motor are providing stainless-steel solutions.
In automation, components must be able to stand up to harsh environments and be long-lasting. See what IP69K product we recommend and where they can be used.
Chemical processing and production are part of a huge billion-pound industry. The importance of chemistry means there is no room for inaccuracies.
OEM Automatic's Motors department have a new updated overview brochure, Read Here! Also see updates from Motors Supplier DOGA!
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Price | ||
---|---|---|---|
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-AW2U+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-AW2U+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-AW2U+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-AW2U+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-AW2U+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-AW2U+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-AW2U+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-AW2U+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-AW2U+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-AW2U+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-AW2U+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-AW2U+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-AW2U+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-AW2U+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-AW2U+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-AW2U+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-AW2U+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-AW2U+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-AW2U+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V lead wire 1ph 60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-AW2U+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-AW2TU+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-AW2TU+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-AW2TU+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-AW2TU+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-AW2TU+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-AW2TU+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-AW2TU+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-AW2TU+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-AW2TU+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-AW2TU+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-AW2TU+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-AW2TU+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-AW2TU+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-AW2TU+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-AW2TU+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-AW2TU+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-AW2TU+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-AW2TU+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-AW2TU+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 110/115V terminal box 1ph 60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-AW2TU+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-AW2J+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-AW2J+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-AW2J+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-AW2J+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-AW2J+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-AW2J+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-AW2J+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-AW2J+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-AW2J+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-AW2J+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-AW2J+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-AW2J+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-AW2J+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-AW2J+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-AW2J+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-AW2J+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-AW2J+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-AW2J+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-AW2J+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 110V lead wire 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-AW2J+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-AW2TJ+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-AW2TJ+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-AW2TJ+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-AW2TJ+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-AW2TJ+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-AW2TJ+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-AW2TJ+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-AW2TJ+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-AW2TJ+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-AW2TJ+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-AW2TJ+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-AW2TJ+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-AW2TJ+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-AW2TJ+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-AW2TJ+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-AW2TJ+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-AW2TJ+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-AW2TJ+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-AW2TJ+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 110V terminal box 1ph 50/60 Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-AW2TJ+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-SW2+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-SW2+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-SW2+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-SW2+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-SW2+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-SW2+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-SW2+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-SW2+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-SW2+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-SW2+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-SW2+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-SW2+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-SW2+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-SW2+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-SW2+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-SW2+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-SW2+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-SW2+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-SW2+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V lead wire 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-SW2+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-SW2T+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-SW2T+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-SW2T+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-SW2T+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-SW2T+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-SW2T+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-SW2T+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-SW2T+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-SW2T+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-SW2T+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-SW2T+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-SW2T+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-SW2T+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-SW2T+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-SW2T+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-SW2T+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-SW2T+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-SW2T+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-SW2T+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 200/220/230V terminal box 3ph 50/60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-SW2T+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-CW2J+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-CW2J+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-CW2J+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-CW2J+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-CW2J+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-CW2J+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-CW2J+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-CW2J+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-CW2J+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-CW2J+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-CW2J+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-CW2J+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-CW2J+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-CW2J+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-CW2J+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-CW2J+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-CW2J+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-CW2J+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-CW2J+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 200V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-CW2J+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-CW2TJ+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-CW2TJ+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-CW2TJ+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-CW2TJ+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-CW2TJ+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-CW2TJ+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-CW2TJ+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-CW2TJ+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-CW2TJ+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-CW2TJ+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-CW2TJ+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-CW2TJ+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-CW2TJ+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-CW2TJ+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-CW2TJ+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-CW2TJ+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-CW2TJ+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-CW2TJ+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-CW2TJ+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 200V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-CW2TJ+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-CW2E+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-CW2E+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-CW2E+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-CW2E+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-CW2E+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-CW2E+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-CW2E+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-CW2E+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-CW2E+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-CW2E+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-CW2E+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-CW2E+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-CW2E+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-CW2E+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-CW2E+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-CW2E+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-CW2E+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-CW2E+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-CW2E+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V lead wire 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-CW2E+4GN90RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 100:1
Art:
4RK25GN-CW2TE+4GN100RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 12.5:1
Art:
4RK25GN-CW2TE+4GN12.5RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 120:1
Art:
4RK25GN-CW2TE+4GN120RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 15:1
Art:
4RK25GN-CW2TE+4GN15RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 150:1
Art:
4RK25GN-CW2TE+4GN150RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 18:1
Art:
4RK25GN-CW2TE+4GN18RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 180:1
Art:
4RK25GN-CW2TE+4GN180RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 25:1
Art:
4RK25GN-CW2TE+4GN25RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3.6:1
Art:
4RK25GN-CW2TE+4GN3.6RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 3:1
Art:
4RK25GN-CW2TE+4GN3RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 30:1
Art:
4RK25GN-CW2TE+4GN30RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 36:1
Art:
4RK25GN-CW2TE+4GN36RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 5:1
Art:
4RK25GN-CW2TE+4GN5RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 50:1
Art:
4RK25GN-CW2TE+4GN50RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 6:1
Art:
4RK25GN-CW2TE+4GN6RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 60:1
Art:
4RK25GN-CW2TE+4GN60RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 7.5:1
Art:
4RK25GN-CW2TE+4GN7.5RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 75:1
Art:
4RK25GN-CW2TE+4GN75RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 9:1
Art:
4RK25GN-CW2TE+4GN9RA
Copied
|
| ||
80mm quick reversible motor 25W 220/230V terminal box 1ph 50/60Hz + 80MM Right angle solid shaft gearbox 90:1
Art:
4RK25GN-CW2TE+4GN90RA
Copied
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: