Search result for 'esi'

In the ever growing industry of process engineering and the use of sensitive equipment and PLC's, the need for a higher degree of interference protection is required for these systems. To ensure the best possible EMC protection the cable shielding and grounding is of the upmost importance. The connection point of the cable screen and the clip is a critical point and is required to be a low Ohm resistance and minimum inductive resistance. Conta-Clip offer one of the most comprehensive range of practical, simple and quick to mount shielding clip products on the market today

Switch loads at set times with time switches from Legrand.

Cable glands are used in a wide range of applications and AGRO has a comprehensive range to suit almost any application. AGRO are a Swiss manufacturer of high-quality cable glands. AGRO offer a full range of glands including: -

• Nickel Plated Brass, Stainless Steel, Reinforced Polyamide and Plastic
• Single, Multi-cable and Flat cable inserts with High Temperature options
• EMC Glands, EMC Ex Certified Glands
• Ex Glands in Metal and Polyamide
• Conduit Glands
• Custom Glands designed and built to order
• Pressure balancing and drainage glands

The PISA multi-channel electronic circuit breakers with DIN rail mounting are designed for current distribution and protection of DC 24 V load circuits. The PISA electronic circuit breakers distribute the current of large power sources to multiple lower current output channels and therefore allow for smaller wires to be used. In the event of a fault, the electronic circuit breaker reliably switches off the channels and protects the loads.

Current transformers are used for the measurement of electric alternating currents. When current in a circuit (primary current) is too high to directly apply to measuring instruments, a current transformer produces a reduced current (secondary current) accurately proportional to the current in the circuit, which can be conveniently connected to measuring and recording instruments. A current transformer also isolates the measuring instruments from what may be very high voltage in the monitored circuit. Relationship between primary and secondary currents is called rated transformation ratio. • Wide range of accuracy classes: 0.2S, 0.2, 0.5, 1 • Wide range of supported primary currents, the dimensions of rails, the length of casing and hole diameters. • Multiple mounting methods, including wall mounting, 35mm DIN rail, the conductor, a current bar. • Shields designed to seal connections.