CONTA-CLIP
PBKZ 4301
Selected variant
Technical data
General Data |
|
|---|---|
| Type | Plug-in connector |
| Pitch | 5,08 mm |
| Colour | Green |
| Number of poles | 2 |
| Approvals | UL, cUL, VDE |
Ratings |
|
| Rated current | 16 A |
| Rated voltage | 250 V |
| Rated cross section | 1,5 mm² |
| Rated impulse voltage | 2 kV |
| Overvoltage category | III |
| Contamination degree | 3 |
Dimensions |
|
| Length | 16,1 mm |
| Width | 10,16 mm |
| Height | 13 mm |
| Width left | 1,1 mm |
| Width right | 3,98 mm |
| Drillhole diameter | 1,4 mm |
| Diameter of the connection pin | 1,1 mm |
| Length of pin | 3,5 mm |
Connection Data |
|
| Connector type/principle | Push-in |
| Number of levels | 1 |
| Angle of PCB/wire connection | 45°/135° (diagonally upwards) |
| Type of attachment to PCB | Solder |
| Electrical connection type to PCB | Connecting contact |
| Cross section single wire from | 0,08 mm² |
| Cross section single wire to | 1,5 mm² |
| Cross section stranded wire from | 0,2 mm² |
| Cross section stranded with ferrule to | 1 mm² |
| Cross section stranded wire to | 1,5 mm² |
| Cross section stranded with ferrule from | 0,14 mm² |
| Rated wire cross section to (AWG) | 16 |
| Rated wire cross section from (AWG) | 22 |
*Invisible Heading* |
|
|---|---|
| Stripping length | 10 mm |
Materials |
|
| Housing material | Polyamide 6.6 |
| Flammability class | UL94-V0 |
| Operating temperature from | -30 °C |
| Operating temperature to | 105 °C |
| Terminal spring | Stainless steel |
| Solder lug | Brass |
Approvals |
|
| UL test standard | UL 1059 |
| Rated voltage UL | 300 V |
| Rated current UL | 10 A |
| cUL test standard | CSA 22.2 No.158 |
| Rated voltage cUL | 300 V |
| Rated current cUL | 10 A |
| VDE test standard | DIN EN 60998 |
| Rated voltage VDE | 250 V |
| Rated current VDE | 16 A |
Additional Data |
|
| Glow wire ignition temperature (GWIT) | GWIT 775 |
| Insulation resistance | 1*10^13 Ω x cm |
| Recommended wave soldering temperature | 265 °C |
| Pack size | 50 |
| Country of origin | QU |
| Tariff code | 85366990 |
| Glow wire flammability index (GWFI) | GWFI 850 |
| Weight | 1 g |
| Recommended wave solder duration min | 3 s |
| GWFI after-glow time | 30 s |
| GWIT exposure time | 5 s |
| Recommended wave solder duration max | 4 s |
| Current creepage resistance | CTI 600 |
| Connection cycles acc. to standard | 10 |
