CONTA-CLIP
PK 601
Selected variant
Technical data
General Data |
|
|---|---|
| Type | PCB terminal |
| Pitch | 3,5 mm |
| Colour | Green |
| Number of poles | 2 |
| Approvals | UL, cUL, VDE |
Ratings |
|
| Rated current | 10 A |
| Rated voltage | 130 V |
| Rated cross section | 1 mm² |
| Rated impulse voltage | 1,25 kV |
| Overvoltage category | III |
| Contamination degree | 3 |
Dimensions |
|
| Length | 7,4 mm |
| Width | 7,4 mm |
| Height | 8,5 mm |
| Width left | 2,15 mm |
| Width right | 1,75 mm |
| Drillhole diameter | 1,2 mm |
| Diameter of the connection pin | 0,9 mm |
| Length of pin | 3,8 mm |
Connection Data |
|
| Connector type/principle | Screw |
| Number of levels | 1 |
| Angle of PCB/wire connection | 0°/180° (horizontal) |
| Type of attachment to PCB | Connecting contact |
| Electrical connection type to PCB | Solder |
| Cross section single wire from | 0,08 mm² |
| Cross section single wire to | 1,5 mm² |
| Cross section stranded wire from | 0,08 mm² |
| Cross section stranded with ferrule to | 0,34 mm² |
| Cross section stranded wire to | 1 mm² |
| Cross section stranded with ferrule from | 0,14 mm² |
| Rated wire cross section to (AWG) | 16 |
| Rated wire cross section from (AWG) | 28 |
| Stripping length | 6 mm |
*Invisible Heading* |
|
|---|---|
| Screw size | M 2 |
| Torque | 0,2 Nm |
Materials |
|
| Housing material | Polyamide 6.6 |
| Flammability class | UL94-V0 |
| Operating temperature from | -30 °C |
| Operating temperature to | 105 °C |
| Solder lug | Brass |
| Screw material | Steel |
| Clamp material | Brass |
Approvals |
|
| UL test standard | UL 1059 |
| Rated voltage UL | 150 V |
| Rated current UL | 10 A |
| cUL test standard | C22.2 No 158 |
| Rated voltage cUL | 150 V |
| Rated current cUL | 10 A |
| VDE test standard | DIN EN 60998 |
| Rated voltage VDE | 130 V |
| Rated current VDE | 10 A |
Additional Data |
|
| Glow wire ignition temperature (GWIT) | GWIT 775 |
| Insulation resistance | 1*10^13 Ω x cm |
| Recommended wave soldering temperature | 265 °C |
| Pack size | 50 |
| Country of origin | QU |
| Tariff code | 85369010 |
| Glow wire flammability index (GWFI) | GWFI 850 |
| Weight | 0,87 g |
| Recommended wave solder duration min | 3 s |
| GWFI after-glow time | 30 s |
| GWIT exposure time | 5 s |
| Recommended wave solder duration max | 4 s |
| Current creepage resistance | CTI 600 |
| Connection cycles acc. to standard | 5 |
