STEGO
Filter fans - Old Range
FF 018
STEGO's filter fans have a special fan housing design so as to run as quietly as possible without sacrificing high airflow. Moreover, the location of the plates makes it especially difficult for water and dust to enter the cabinet.
Filters and fans can be changed from the outside of the cabinet; consequently, the unit does not need to be turned off during fan maintenance.
For optimal performance, the filter fan should be mounted at the lower edge of the cabinet. At the upper edge of the corresponding side, a exit cover with a filter should be mounted for evacuation of surplus air. The exit cover is the same as the fan housing and the cut-outs are also the same.
Â
All filter fans are UL-approved and able to withstand the elements, including UV radiation.
Â
- Quick installation
- Minimal installation depth
- Low noise level
- IP55 with F5/M5 filter mat
Selected variant
Technical data
General Data |
|
|---|---|
| Air capacity | 21 m³/h |
| Air volume free blowing | 21 m³/h |
| Air volume free blowing with G3 filter | 16 m³/h |
| Number of fans | 1 |
| Sound level | 31 dB |
Dimensions |
|
| Width | 129 mm |
| Height | 134 mm |
| Depth | 80 mm |
| Behind panel depth | 45 mm |
| Hole size | 97x97 mm |
| Weight | 0.6 kg |
Materials |
|
| Colour | Grey RAL 7035 |
| Material plastic housing | Plastic |
| Flammability class | UL94-V0 |
| Materials fan | Aluminium |
*Invisible Heading* |
|
|---|---|
| Material of rotor | Plastic |
| Filter grade | 94 % |
Rated Operating Conditions |
|
| Voltage max | 230 V ac |
| Voltage min | 230 V ac |
| Frequency | 50 Hz |
| Power consumption | 13 W |
| Life span | 50000 h |
| Storage temperature | -40°C ... +70°C |
| Operational temperature | -10°C ... +70°C |
| Operating humidity | < 90% RH |
| Humidity storage | <90% RH |
Safety and Approvals |
|
| IP class | IP54, IP55 |
| Approvals | CE, cULus, EAC, RoHS, UL, UL E234324, UV - UL746C (f1), VDE |
Product description
STEGO's filter fans have a special fan housing design so as to run as quietly as possible without sacrificing high airflow. Moreover, the location of the plates makes it especially difficult for water and dust to enter the cabinet.
Filters and fans can be changed from the outside of the cabinet; consequently, the unit does not need to be turned off during fan maintenance.
For optimal performance, the filter fan should be mounted at the lower edge of the cabinet. At the upper edge of the corresponding side, a exit cover with a filter should be mounted for evacuation of surplus air. The exit cover is the same as the fan housing and the cut-outs are also the same.
Â
All filter fans are UL-approved and able to withstand the elements, including UV radiation.
Â
Related
Lightning and surge protection for DC and control signals
Do you need reliable protection for measuring and control equipment? DEHN YellowLine delivers voltage surge protection tailored for building, measuring, and control systems
Signal Lights For You
New signal lights from Auer Signal are now available! The first products to be launched in this series are the Smart Dot 50 in the Basic and Standard versions, as well as the Smart Indicator 50 in the Basic version.Â
Optimise your production line with sensors
Optimise your production line with encoders, inclinometers, displays and slip rings
Every angle covered with 90 degree cable entry system
Engineers and technicians are seeking solutions that streamline assembly whilst maintaining high levels of protection and flexibility. KDS-SR90 angled screw frames and inlays bring a new level of efficiency to cable routing with a unique 90° entry design.
The smallest logic controller ever on limited time discount
The smallest logic controller by Crouzet is now 20% off for a limited time only! A powerhouse packed into just 17.5mm! Efficiency, adaptability, and seamless integration with free software.
11 questions to get the right signalling device – a whitepaper
Do you require signalling devices and beacons in your production process? Download our latest whitepaper!
