APLISENS
Aplisens - PRE-28 Smart differential pressure transmitter
The Aplisens PRE-28 Smart differentail pressure sensor is applicable to the measurment of the pressure, underpressure and absolute pressure of gases, vapours and liquids.
This pressure sensor comes with many extra options such as ATEX, DNV marine certificate, housing options, process connections and materials making this sensor very versatile.
Through the data interchange (HART) with the sensor you can:
- Identify the transmitter
- Configure the ouput parameters as below:
Measurement units and the values of the start and end points of the range
Damping time constant
Conversion characteristic (inversion, user's non-linear characteristics)
- Read the currently measured hydrostatic pressure value, output current and percenatge of measuring range
- Force an output current with a set value
- Calibrate the transmitter in relation to a model pressure
Application examples:
- Oil & Gas
- Process
- Chemical
- Water management
- Nine standard pressure ranges
- HART protocol
- ATEX & DNV versions
- 0.1% accuracy
Selected variant
Technical data
| Connection | 1/4" NPT-F |
|---|---|
| Deviation max | 0,1 % |
| Electrical connection | DIN EN 175301-803-A |
| IP class | IP65 |
| Material of body | Stainless steel AISI 304 |
| Material of wetted parts | Stainless steel 316L |
| Pressure range max | 70 bar |
| Pressure range min | 0 bar |
| Signal type | 4-20 mA / Hart |
| Static pressure | 70 bar |
|---|---|
| Supply voltage dc max | 55 V DC |
| Supply voltage dc min | 7,5 V DC |
| Temperature ambient from | -25 °C |
| Temperature ambient to | 85 °C |
| Temperature of media from | -25 °C |
| Temperature of media to | 120 °C |
Product description
The Aplisens PRE-28 Smart differentail pressure sensor is applicable to the measurment of the pressure, underpressure and absolute pressure of gases, vapours and liquids.
This pressure sensor comes with many extra options such as ATEX, DNV marine certificate, housing options, process connections and materials making this sensor very versatile.
Through the data interchange (HART) with the sensor you can:
- Identify the transmitter
- Configure the ouput parameters as below:
Measurement units and the values of the start and end points of the range
Damping time constant
Conversion characteristic (inversion, user's non-linear characteristics)
- Read the currently measured hydrostatic pressure value, output current and percenatge of measuring range
- Force an output current with a set value
- Calibrate the transmitter in relation to a model pressure
Application examples:
- Oil & Gas
- Process
- Chemical
- Water management
Ordering information
Please refer to the datasheet further down the page under Downloads.
