ELECTROMEN
EM-170 motor controller is designed for small DC-motors. The controller operates in 4-quadrants,
in other words it is possible to drive the motor in varible speed, change motor running direction and brake. The
power stage operates with PWM-principle and has thus high efficiency.
Speed set value is given as analog voltage signal. Motor voltage is fed back to controller, so changes in operating voltage will not affect motor running speed. 10V regulated auxillary voltage can be used for speed set potentiometer reference voltage. The acceleration speed can be adjusted with acceleration and deceleration ramp. Deceleration ramp can also be bypassed when rapid braking is desired. Additionally the unit is equipped with speed2-feature, which can be activated individually. This is especially practical in positioning applications. Current limit can be used to restrict motor torque and is dip-switch settable. Control inputs work with positive (NPN) logic. EM-170 is EMC-tested in accordance with industrial standards.
FEATURES:
• 4-quadrants
• controlled direction change
• brake
• adjustable current limit
• acceleration and deceleration ramp
• dip-switch settable
• EMC-tested
Analogue input | 0-10V |
---|---|
Control type | Speed, Braking, Direction, Torque, Soft start / stop |
Current setting range | 0.2-2 A |
Dimensions length x width x height | 60x60x20mm mm |
Logic input high | >4V = ON |
Logic input low | <1V = OFF |
Max continuous current | 2 A |
Mounting | DIN rail |
Operating temperature | 0°C...+60°C |
---|---|
Peak current | 2 A |
PWM frequency | 16kHz |
Suitable engine | DC |
Supplier | Electromen |
Supply voltage | 12 V DC, 24 V DC |
Weight | 30 g |
EM-170 motor controller is designed for small DC-motors. The controller operates in 4-quadrants,
in other words it is possible to drive the motor in varible speed, change motor running direction and brake. The
power stage operates with PWM-principle and has thus high efficiency.
Speed set value is given as analog voltage signal. Motor voltage is fed back to controller, so changes in operating voltage will not affect motor running speed. 10V regulated auxillary voltage can be used for speed set potentiometer reference voltage. The acceleration speed can be adjusted with acceleration and deceleration ramp. Deceleration ramp can also be bypassed when rapid braking is desired. Additionally the unit is equipped with speed2-feature, which can be activated individually. This is especially practical in positioning applications. Current limit can be used to restrict motor torque and is dip-switch settable. Control inputs work with positive (NPN) logic. EM-170 is EMC-tested in accordance with industrial standards.
FEATURES:
• 4-quadrants
• controlled direction change
• brake
• adjustable current limit
• acceleration and deceleration ramp
• dip-switch settable
• EMC-tested
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Price | ||
---|---|---|---|
DC motor 4Q drive 12-24 V dc, 1.5 A
Art:
EM-170
Copied
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: