SIMPLEXMOTION
Simplex Motion - SH Series
Smart open framed fully integrated servomotors
The SH series drive unit is controlled by a data bus, either USB or Modbus RTU (RS485) or CANOpen 301. The outrunner motor design typically has 2-3 times a higher peak torque per weight compared to many conventional rotor designs.
The integrated controller performs closed loop control of speed and position, it supports acceleration and deceleration ramping for smooth motion patterns. The controller also provides protection from over-current, over-voltage, excessive temperature and torque.
To facilitate standalone operation, the built-in control unit has 8 digital inputs, 4 analogue inputs and 8 digital outputs. These can be configured to provide simple direct control using buttons and potentiometers interfaces and allow the SH series to be used outside of PLC based system control.
- Standalone / comms based control
- 12-48Vdc, >0.72Nm, >3000rpm
- 4096 ppr encoder
- 12 inputs / 4 outputs
- Modbus RTU / CANOpen / USB
Selected variant
Technical data
| Analogue Inputs | 4 |
|---|---|
| Digital inputs | 8 |
| Digital outputs | 4 |
| Max current | 25 A |
| Max. torque | 2 Nm |
| Nominal current | 8 A |
| Nominal speed | 3000 rpm |
| Nominal torque | 0,51 Nm |
|---|---|
| Number of pulses per revolution | 4096 |
| Shaft diameter | 8 mm |
| Supply voltage | 12 V DC, 24 V DC |
| Weight | 0,5 kg |
Product description
The SH series drive unit is controlled by a data bus, either USB or Modbus RTU (RS485) or CANOpen 301. The outrunner motor design typically has 2-3 times a higher peak torque per weight compared to many conventional rotor designs.
The integrated controller performs closed loop control of speed and position, it supports acceleration and deceleration ramping for smooth motion patterns. The controller also provides protection from over-current, over-voltage, excessive temperature and torque.
To facilitate standalone operation, the built-in control unit has 8 digital inputs, 4 analogue inputs and 8 digital outputs. These can be configured to provide simple direct control using buttons and potentiometers interfaces and allow the SH series to be used outside of PLC based system control.
