MINIMOTOR
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
Rated torque up to 2.1 Nm.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.
Please click here for 2D and 3D drawings.
General Data |
|
---|---|
Nominal speed | 3000 rpm |
Nominal torque | 0,4 Nm |
Input voltage dc | 24/48 Vdc |
Digital inputs | 2 pnp (24Vdc, 500kHz) , 3 pnp (24Vdc, 7kHz) |
Outputs | 1 NO 2A (42 Vdc) |
Output power | 125 W |
Rated current | 8A@24V/4.2A@48V A |
Nominal overload | 200% x 60 sec |
Motor control algorythm | Sinusoidal brushless with 12Bit single-turn / 20Bit multi-turn absolute encoder |
Nominal output frequency carrier | 4/8/12 kHz |
Electronic brake output | 24Vdc, max 0.5A |
Ambient temperature | -10 ... +40°C |
Safety Features |
|
IP class | IP65 |
CE approved | Yes |
Over voltage protection | Yes |
*Invisible Heading* |
|
---|---|
Under voltage protection | Yes |
Overheat protection | Yes |
Memory error protection | Yes |
Polarity reverse protection | Yes |
Overcurrent protection | Yes |
Communication error protection | Yes |
Overload protection | Yes |
Communication |
|
Communication | USB |
Ethercat | Yes |
CanOpen | Yes |
ProfiNET | Yes |
Ethernet IP | Yes |
Modbus RTU | Yes |
PowerLink | Yes |
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
Rated torque up to 2.1 Nm.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.
Please click here for 2D and 3D drawings.
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Nominal torque | Input voltage dc | Output power | Rated current | Nominal overload | Price | ||
---|---|---|---|---|---|---|---|---|
24/48V dc 3000rpm 0.4Nm 125W
Art:
DBS 55/50
Copied
|
0,4 Nm
|
24/48 Vdc
|
125 W
|
8A@24V/4.2A@48V A
|
200% x 60 sec
|
| ||
48V dc 3000rpm 0.8Nm 250W
Art:
DBS 55/100
Copied
|
0,75 Nm
|
48 Vdc
|
235 W
|
6.3 A
|
200% x 60 sec
|
| ||
48V dc, 3000rpm, 1.1nm, 345 W
Art:
DBS 80/50
Copied
|
1,1 Nm
|
48 Vdc
|
345 W
|
9.9 A
|
150% x 60 sec
|
| ||
48V dc, 3000rpm, 2.1nm, 660 W
Art:
DBS 80/100
Copied
|
2,1 Nm
|
48 Vdc
|
660 W
|
15.7 A
|
150% x 60 sec
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: