LUMEL
Lumel RP3 three phase power controller
The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)
This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.
The application area of RP3 power controllers comprises:
• electrical furnaces and drying constructions, particularly industrial tunnels and belt- type furnaces, furnaces for annealing and hard soldering, crucible furnaces and smelters, furnaces for hardening in salt baths
• devices of mechanical engineering, aggregates and extruding presses for plastics, devices, for winding and tempering of springs, spot welding and seam welders
• production of glass and glazing, installations and devices for drying in infrared and ultraviolet radiation, ladles for glass melt and heating of feeding devices, furnaces for glass forming• chemical and petroleum industries, facing heaters of tube installations, preheating installations
KINDS OF CONTROL
• On-off control
• Chopper control:
o fast cycle - fi,max » 1 Hz
o slow cycle - fi,max » 0.1 Hz
o Phase control
ADDITIONAL FUNCTIONS
• Load current limitation
• Delay of soft start tripping type
• Control of the initial gating angle value
• Control of the input line amplification
• Supervising and signalling of the current in the load circuit, output U= f(lo)
• Supervising of the radiator temperature
• Signalling of the fuse damage
• Signalling of the incorrect phase sequence
• Signalling of overload
• Relay outputs
- Contactless power switching on
- Output current up to 450 A
- Alarming relay outputs
- Control by an impulse, analogue or potentiometer signal
Selected variant
Technical data
| Dimensions | 212 x 318 x 177 mm |
|---|---|
| Output | Maximum output current 125A |
| Temperature operational max | 40 °C |
| Temperature operational min | 0 °C |
| Weight | 8,5 kg |
Downloads
Product description
The RP3 power controller is a contactless three-phase power energy electronic device which includes a thyristor connector and an electronic gate triggering system. (GTS)
This power controller allows the control of the power delivered from a three-phase voltage source to an electrical energy load in function of the control signal input. The RP3 power controller is destined for three-phase actuators with resistance or resistance-inductance loads in control systems and automatic temperature control.
The application area of RP3 power controllers comprises:
• electrical furnaces and drying constructions, particularly industrial tunnels and belt- type furnaces, furnaces for annealing and hard soldering, crucible furnaces and smelters, furnaces for hardening in salt baths
• devices of mechanical engineering, aggregates and extruding presses for plastics, devices, for winding and tempering of springs, spot welding and seam welders
• production of glass and glazing, installations and devices for drying in infrared and ultraviolet radiation, ladles for glass melt and heating of feeding devices, furnaces for glass forming• chemical and petroleum industries, facing heaters of tube installations, preheating installations
KINDS OF CONTROL
• On-off control
• Chopper control:
o fast cycle - fi,max » 1 Hz
o slow cycle - fi,max » 0.1 Hz
o Phase control
ADDITIONAL FUNCTIONS
• Load current limitation
• Delay of soft start tripping type
• Control of the initial gating angle value
• Control of the input line amplification
• Supervising and signalling of the current in the load circuit, output U= f(lo)
• Supervising of the radiator temperature
• Signalling of the fuse damage
• Signalling of the incorrect phase sequence
• Signalling of overload
• Relay outputs
Related
Efficient crimping, punching and stripping
Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
Cable Protection For Emobility
To promote constant and reliable performance, as well as a longer life of parts in the vehicle, it is important to consider the right cable protector.
Switch disconnectors without compromise
We have now added switch disconnectors to our range! Switch disconnectors contribute to the overall functionality and safety of electrical systems.
Electronic Circuit Breaker - LoccBox
LOCC-Box from Lutze is an intelligent current monitoring device that provides reliable protection of DC circuits in a slimline 8.1mm housing.
The Push In Technology You Need at OEM Automatic
OEM Automatic has integrated push-in technology into it's product offering for many years now. In this blog post, we'll explore the various benefits of push-in technology and some of the products we offer that make use of this innovation, such as push-in terminals, push-in sockets, and even push-in heaters.
