BACO
Switch disconnector range with patented design reversible terminals to allow front or rear mount.
Can be used to safely switch and isolate up to 690V thanks to a wider contact air gap of 7mm.
Â
All switch body options have 3 poles with reversible terminals.
Up to 4 neutral poles / additional poles can be snapped on to a switch body (2 each side).
Up to 2 N/C+N/O auxillary blocks / early break auxillary blocks can be snapped on to a switch body (1 each side).
The maximum per switch body is 2 each side and the auxillary contacts must be on the outside.
Â
For rear mount the switch body simply snaps onto DIN rail. Note the reversible terminals need to be pushed up before clipping onto the DIN rail and then pushed back down to lock into place and reveal the terminal screw heads.
There are 3 clutch drive kits to accomodate different panel depths and the door interlock shroud ensures the panel door can only be opened in the OFF position.
Â
For front mount various handle options are available that are either fixed by screw or ø22mm one-hole mounted.
All screw terminals are finger proof to IPxxB but additional terminal covers can be added if required.
Gasket kits are available to increase front of panel protection from IP40 to IP65.
Approvals | CB, cUL, UL |
---|---|
Breaking capacity current | 32 A |
Colour | Red/yellow |
Connection solid wire max | 10 mm² |
Connection stranded wire with ferrule max | 6 mm² |
Connection stranded wire with ferrule min | 0.75 mm² |
Conventional enclosed thermal current Ithe | 25 A |
Conventional free air thermal current Ith | 32 A |
Impact resistance | IK07 |
Mechanical life AC20 (million) | 0.1 |
Mounting | Enclosure |
Number of poles | 3 |
Protection rating front of panel | IP66 |
Protection rating rear of panel | IPxxB |
Rated break capacity (Aeff/400V) | 330 A |
Rated impulse withstand voltage Uimp (Overvoltage cat III - Pollution 3) | 6 kV |
Rated insulation voltage Ui | 690 V |
Rated make capacity (Aeff/400V) | 710 A |
Rated operating current Ie (AC15/230V) | 6 A |
Rated operating current Ie (AC15/400V) | 4 A |
Rated operating current Ie (AC21A/22A) | 32 A |
Rated operating power (AC23A/3x230V) | 5,5 kW |
---|---|
Rated operating power (AC23A/3x400V) | 11 kW |
Rated operating power (AC23A/3x500V) | 11 kW |
Rated operating power (AC23A/3x690V) | 11 kW |
Rated operating power (AC3/3x230V) | 4 kW |
Rated operating power (AC3/3x400V) | 7,5 kW |
Rated operating power (AC3/3x500V) | 7,5 kW |
Rated operating power (AC3/3x690V) | 7,5 kW |
Rated short circuit make capacity Icm (kA peak/400V) | 1 kA |
Rated short term withstand current Icw (Aeff/400V/1 s) | 430 A |
Rated uninterrupted current Iu | 32 A |
Short circuit current (kAeff/400 V) | 10 kA |
Short circuit current with fuse gl/gG (A) | 32 A |
Standards | CSA 22.2, IEC 60947-3 , UL 508 |
Storage temperature max | 70 °C |
Storage temperature min | -30 °C |
Temperature operational max | 70 °C |
Temperature operational min | -30 °C |
Type | Switch & handle enclosed |
Switch disconnector range with patented design reversible terminals to allow front or rear mount.
Can be used to safely switch and isolate up to 690V thanks to a wider contact air gap of 7mm.
Â
All switch body options have 3 poles with reversible terminals.
Up to 4 neutral poles / additional poles can be snapped on to a switch body (2 each side).
Up to 2 N/C+N/O auxillary blocks / early break auxillary blocks can be snapped on to a switch body (1 each side).
The maximum per switch body is 2 each side and the auxillary contacts must be on the outside.
Â
For rear mount the switch body simply snaps onto DIN rail. Note the reversible terminals need to be pushed up before clipping onto the DIN rail and then pushed back down to lock into place and reveal the terminal screw heads.
There are 3 clutch drive kits to accomodate different panel depths and the door interlock shroud ensures the panel door can only be opened in the OFF position.
Â
For front mount various handle options are available that are either fixed by screw or ø22mm one-hole mounted.
All screw terminals are finger proof to IPxxB but additional terminal covers can be added if required.
Gasket kits are available to increase front of panel protection from IP40 to IP65.
Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.Â
To promote constant and reliable performance, as well as a longer life of parts in the vehicle, it is important to consider the right cable protector.
We have now added switch disconnectors to our range! Switch disconnectors contribute to the overall functionality and safety of electrical systems.
LOCC-Box from Lutze is an intelligent current monitoring device that provides reliable protection of DC circuits in a slimline 8.1mm housing.
OEM Automatic has integrated push-in technology into it's product offering for many years now. In this blog post, we'll explore the various benefits of push-in technology and some of the products we offer that make use of this innovation, such as push-in terminals, push-in sockets, and even push-in heaters.
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Breaking capacity current | Colour | Impact resistance | Mounting | Number of poles | Protection rating front of panel | Type | Price | ||
---|---|---|---|---|---|---|---|---|---|---|
Switch Disconnector 3 Pole 32A + Handle
Art:
0172101
Copied
|
32 A
|
Red/yellow
|
|
Screw on, TS 35
|
3
|
IP40
|
Switch and handle
|
| ||
Switch Disconnector 3 Pole 32A + Handle Grey
Art:
0174101
Copied
|
32 A
|
Grey
|
|
Screw on, TS 35
|
3
|
IP40
|
Switch and handle
|
| ||
Neutral Pole 32A
Art:
0172165
Copied
|
32 A
|
|
|
|
1
|
IP40
|
Neutral / additional pole
|
| ||
Additional Pole 32A
Art:
0172175
Copied
|
|
|
|
|
1
|
IP40
|
|
| ||
Switch Disconnector 3 Pole 32A + Handle & Clutch Drive
Art:
0165109
Copied
|
32 A
|
Red/yellow
|
|
Screw on, Shoulder, TS 35
|
3
|
IP40
|
Switch and handle with clutch drive
|
| ||
Switch Disconnector 3 Pole 32A Enclosure & Handle
Art:
0172161
Copied
|
32 A
|
Red/yellow
|
IK07
|
Enclosure
|
3
|
IP66
|
Switch & handle enclosed
|
| ||
Switch Disconnector 3 Pole 32A Enclosure & Handle Grey
Art:
0174161
Copied
|
32 A
|
Grey
|
IK07
|
Enclosure
|
3
|
IP66
|
Switch & handle enclosed
|
| ||
Switch Disconnector 3 Pole 32A
Art:
0172100
Copied
|
32 A
|
|
|
Screw on, TS 35
|
3
|
IP40
|
Switch block
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: