Important notice - We will be performing system maintenance from 4pm Friday 19th April. Whilst we are performing this maintenance there will be no pricing available or ability to place orders. This will last for 2-3 days. Please contact customer support for any enquiries 0116 284 9900. We apologise for any inconvenience caused.
CONTA-CLIP
KDS-FP
Flange plates
New versatility for managing cables
The new KDS-FP flange plate provides manufacturers of machines and panels with a very cost-effective, convenient cable entry system solution.
It can be used to adapt housings and switchgear cabinets to fit your multiple cables and has the flexibility to accommadate any updated wiring requirements at any time, and can also considerably simplify your warehousing.
You no longer have to stock switchgear cabinets or enclosures with different cut-out configurations of assembled cable and cable outlets. Instead, you can uniformly prepare your products with the flange plate and then adapt them at any time to your specific cabling or tubing requirements.
In the future, CONTA-CLIP will also offer the flange plates of the KDS-FP series in other shapes and sizes.
Your advantage is that you save money by requiring fewer variants.
The modular design – 3 basic components – provides more flexibility
1. Flange plate
The flange plate is available in the 2 variants;
KDS-FP-2x10/24 (up to 20 feed-through openings)
KDS-FP-3x10/24 (up to 30 feed-through openings)
Uniform housing break-outs of 131 x 110 mm or 131 x 161 mm are used for installation.
By screwing the flange plate on the outside of the cabinet,the break-out is completely sealed according to IP66.
On the closed flange plates, there are two or three cover segments with pre-determined breaking points; these can
be pushed out (without tools) which then opens up a 40 x 110 mm feed-through opening.
The click-in KDSClickframe inlays can be used to subdivide this opening in up to ten appropriately sized frame openings.
2. Inlays
The click-in inlays enable needs-based dimensioning of the frame opening, corresponding to the seal being used.
An audible "click" confirms a correct installation. So you can configure the cable entries to match various requirements
(for cables, lines, tubing, pneumatic and hydraulic lines).
3. Seals
The conical shape of the seal makes it easy to press in. Thisalso reliably seals the gaps and ensures strain relief in accordance
with DIN EN 62444. The seals are installed by pressing them from the inside outwards into the openings of the previously installed inlays.
Their wave-cut profile makes them easy to install and ensures a perfect fit around the cables.
There are currently over 90 different seals that can be used for sealing cables of various diameters and sizes.
General data |
|
|---|---|
| Mounting | Screw |
| Colour | Black |
| IP class | IP66 |
| NEMA class | 4x |
| Length | 165 mm |
| Width | 174 mm |
| Height | 17,5 mm |
| Installed height | 10,5 mm |
Mounting details |
|
| Number of screw holes | 8 |
| Diameter of the screw holes | 5,5 mm |
| Fixing screws | M5 |
| Torque of the fixing screws | 3 Nm |
Materials |
|
| Material | Polyamide |
*Invisible Heading* |
|
|---|---|
| Glass-fibre reinforced | Yes |
| Flammability class | V-0 |
| Sealing material | Polyurethane |
| Silicone-free | Yes |
| Halogen-free | Yes |
| Operating temperature from | -40 °C |
| Operating temperature to | 120 °C |
Additional data |
|
| Tariff code | 39259020 |
| Country of origin | DE |
| Weight | 160 g |
| Pack size | 1 |
KDS-FP
Flange plates
New versatility for managing cables
The new KDS-FP flange plate provides manufacturers of machines and panels with a very cost-effective, convenient cable entry system solution.
It can be used to adapt housings and switchgear cabinets to fit your multiple cables and has the flexibility to accommadate any updated wiring requirements at any time, and can also considerably simplify your warehousing.
You no longer have to stock switchgear cabinets or enclosures with different cut-out configurations of assembled cable and cable outlets. Instead, you can uniformly prepare your products with the flange plate and then adapt them at any time to your specific cabling or tubing requirements.
In the future, CONTA-CLIP will also offer the flange plates of the KDS-FP series in other shapes and sizes.
Your advantage is that you save money by requiring fewer variants.
The modular design – 3 basic components – provides more flexibility
1. Flange plate
The flange plate is available in the 2 variants;
KDS-FP-2x10/24 (up to 20 feed-through openings)
KDS-FP-3x10/24 (up to 30 feed-through openings)
Uniform housing break-outs of 131 x 110 mm or 131 x 161 mm are used for installation.
By screwing the flange plate on the outside of the cabinet,the break-out is completely sealed according to IP66.
On the closed flange plates, there are two or three cover segments with pre-determined breaking points; these can
be pushed out (without tools) which then opens up a 40 x 110 mm feed-through opening.
The click-in KDSClickframe inlays can be used to subdivide this opening in up to ten appropriately sized frame openings.
2. Inlays
The click-in inlays enable needs-based dimensioning of the frame opening, corresponding to the seal being used.
An audible "click" confirms a correct installation. So you can configure the cable entries to match various requirements
(for cables, lines, tubing, pneumatic and hydraulic lines).
3. Seals
The conical shape of the seal makes it easy to press in. Thisalso reliably seals the gaps and ensures strain relief in accordance
with DIN EN 62444. The seals are installed by pressing them from the inside outwards into the openings of the previously installed inlays.
Their wave-cut profile makes them easy to install and ensures a perfect fit around the cables.
There are currently over 90 different seals that can be used for sealing cables of various diameters and sizes.
Renowned for high-quality cable cutting and crimping tools, Klauke serves electrical contractors, cable jointers, and linemen across a spectrum of sectors
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
To promote constant and reliable performance, as well as a longer life of parts in the vehicle, it is important to consider the right cable protector.
We have now added switch disconnectors to our range! Switch disconnectors contribute to the overall functionality and safety of electrical systems.
LOCC-Box from Lutze is an intelligent current monitoring device that provides reliable protection of DC circuits in a slimline 8.1mm housing.
OEM Automatic has integrated push-in technology into it's product offering for many years now. In this blog post, we'll explore the various benefits of push-in technology and some of the products we offer that make use of this innovation, such as push-in terminals, push-in sockets, and even push-in heaters.
|
|
|
|
|
|
||
|---|---|---|---|---|---|---|
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
| Parts | Width | Number of screw holes | Weight | Price | ||
|---|---|---|---|---|---|---|
KDS-FP 2 x 10/24, Flange plate
Art:
28660.4
Copied
|
123 mm
|
6
|
146 g
|
| ||
|
KDS-FP 3 x 10/24, Flange plate
Art:
28661.4
Copied
|
174 mm
|
8
|
160 g
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways:
