ELECTROMEN
EM-167 is a compact positioning driver. The unit is equipped with its own set value potentiometer. EM-
167 also has an inbuilt servo-amp. and power stage which is capable of driving a DC motor directly. It is
suitable for driving a DC spindle motors equipped with feedback potentiometer. EM-167 is best suited for
slow and medium speed systems with a transitional period of 2...30s (from end to end).
The current limit is adjustable and can be used to limit the torque of the motor. Current trip feature will
shut down the driver in fault situation, if either current is on the limit for over 2s, or if it takes more than
30s to reach the set value. In fault situation the error output will be activated. Reactivation from the trip
situation is done by applying a reverse control command.
Positioning is done by giving a set value using the EM-167 internal potentiometer. The driver compares
the feedback value to the set value and starts to drive the motor towards the set value. When these values
begin to approach each other the driver will slow down, and when the values are identical the motor stops.
The operating range can be adjusted / limited from both ends with min. and max. adjustments. EM-167
is small-sized and easy to install. Due to its wide temperature range, the unit is suitable also for vehicle
use. The power stage is equipped with self recovery overload and over current protection, but the use of
an external fuse is recommended.
FEATURES
• small size
• pos. accuracy typ. ±1%
• good efficiency >92%
• for motors 5-200W
• start- and stop-ramp
• overload protected
• adjustable current limit
• adjustable range
Analogue input | 0-5V |
---|---|
Control type | Direction, Torque, Position, Soft start / stop |
Current setting range | 0-15 A |
Dimensions length x width x height | 39x39x50mm mm |
Max continuous current | 4 A |
Mounting | Panel mount |
Operating temperature | -20°C...+60°C |
Peak current | 15 A |
---|---|
Suitable engine | DC |
Supplier | Electromen |
Supply voltage | 12 V DC, 24 V DC |
Weight | 85 g |
EM-167 is a compact positioning driver. The unit is equipped with its own set value potentiometer. EM-
167 also has an inbuilt servo-amp. and power stage which is capable of driving a DC motor directly. It is
suitable for driving a DC spindle motors equipped with feedback potentiometer. EM-167 is best suited for
slow and medium speed systems with a transitional period of 2...30s (from end to end).
The current limit is adjustable and can be used to limit the torque of the motor. Current trip feature will
shut down the driver in fault situation, if either current is on the limit for over 2s, or if it takes more than
30s to reach the set value. In fault situation the error output will be activated. Reactivation from the trip
situation is done by applying a reverse control command.
Positioning is done by giving a set value using the EM-167 internal potentiometer. The driver compares
the feedback value to the set value and starts to drive the motor towards the set value. When these values
begin to approach each other the driver will slow down, and when the values are identical the motor stops.
The operating range can be adjusted / limited from both ends with min. and max. adjustments. EM-167
is small-sized and easy to install. Due to its wide temperature range, the unit is suitable also for vehicle
use. The power stage is equipped with self recovery overload and over current protection, but the use of
an external fuse is recommended.
FEATURES
• small size
• pos. accuracy typ. ±1%
• good efficiency >92%
• for motors 5-200W
• start- and stop-ramp
• overload protected
• adjustable current limit
• adjustable range
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
Technosoft specialise in developing intelligent drives and certainly live up to the term 'intelligent’, by combining a powerful motor and motion controller to implement complex movements.
One of the leading names in motors and drives, Oriental Motor, has signed a distribution deal with OEM Automatic. OEM Automatic can support customers, especially where an AC or Brushless DC (BLDC) motor has been discontinued or proving hard to source.
The Simplex Motion integrated servomotor is a brushless DC motor with integrated electronics and outrunner rotor. You can now browse Simplex Motion servomotors on our website.
OEM Automatic currently offers PMW’s range of standard pancake motors, as well as its bespoke design service. PMW’s motor portfolio caters for customers requiring both brushed and brushless configurations, supplied as housed or frameless, for both geared and direct drive applications.
DOGA’s new 311 and 311E is a right angle geared motor range, available with or without an integrated drive offering CANopen compatibility,
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Price | ||
---|---|---|---|
DC motor positioning drive 12-32 V dc, 4 A, analogue FB
Art:
EM-167
Copied
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: