ELECTROMEN
Electromen - EM-206 BLDC motor 4Q drive 12-36 V dc, 10 A
EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback. The unit has a mosfet-type high efficiency power stage. EM-206 can be connected to motors using 60º or 120º commutation. The unit is equipped with standard controls, such as speed, stop, reversing and braking. Mechanical installation can be done with screws or by using a rail mounting base.
There are two control options. Direct control (open loop) sets motor voltage in proportion to control voltage, as with a standard DC-motor. Frequency locked control (closed loop) uses hall sensor feedback for speed set besides commutation set. This way a precise speed control is attained. Closed loop response can be altered so that the adjustment remains stabile in given application. Speed control signal can be scaled with trimmers.
Current limit restricts motor torque when motor current exceeds set value. Current limit can be set with a trimmer or with external signal. Fault output indicates the operation of the current limit. EM-206 is protected against surge voltage and overheating (excess load). The unit requires an external fuse.
As an option, EM-A1 expansion card can be installed, this makes it possible to control EM-206 with ±10V signal.
FEATURES:
• Three phase output
• Continuous speed adjustment
• Reversing
• Braking
• ±10V control option
• Hall sensor supply and input
• 60º or 120º commutation
• Settable / controllable current limit
• Fault output
• Open or closed loop activity
• High efficiency
• Rail base mountable
- 12-36 V dc, 10 A continuous, 15 A peak
- Open & closed loop (hall sensor feedback) control operation
- Speed, direction, current limiting, soft start/stop and braking control
- Compact, din rail mountable
- EM-A1 card slot option for symmetrical control ±10V (rev-stop-fwd)
Selected variant
Technical data
| Analogue input | 0-5V or 0-10V or +/-0-10V |
|---|---|
| Control type | Braking, Direction, Speed, Torque |
| Current setting range | 0-15 A |
| Dimensions length x width x height | 89x73x25mm mm |
| Logic input high | >3V = ON |
| Logic input low | <1V = OFF |
| Max continuous current | 10 A |
| Mounting | DIN rail |
|---|---|
| Peak current | 15 A |
| Suitable engine | BLDC |
| Supplier | Electromen |
| Supply voltage | 12 V DC, 24 V DC, 36 V DC |
| Weight | 130 g |
Downloads
Product description
EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback. The unit has a mosfet-type high efficiency power stage. EM-206 can be connected to motors using 60º or 120º commutation. The unit is equipped with standard controls, such as speed, stop, reversing and braking. Mechanical installation can be done with screws or by using a rail mounting base.
There are two control options. Direct control (open loop) sets motor voltage in proportion to control voltage, as with a standard DC-motor. Frequency locked control (closed loop) uses hall sensor feedback for speed set besides commutation set. This way a precise speed control is attained. Closed loop response can be altered so that the adjustment remains stabile in given application. Speed control signal can be scaled with trimmers.
Current limit restricts motor torque when motor current exceeds set value. Current limit can be set with a trimmer or with external signal. Fault output indicates the operation of the current limit. EM-206 is protected against surge voltage and overheating (excess load). The unit requires an external fuse.
As an option, EM-A1 expansion card can be installed, this makes it possible to control EM-206 with ±10V signal.
FEATURES:
• Three phase output
• Continuous speed adjustment
• Reversing
• Braking
• ±10V control option
• Hall sensor supply and input
• 60º or 120º commutation
• Settable / controllable current limit
• Fault output
• Open or closed loop activity
• High efficiency
• Rail base mountable
Related
Case Study - Electro Pneumatic Control Box
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
Intelligent drives by Technosoft
Technosoft specialise in developing intelligent drives and certainly live up to the term 'intelligent’, by combining a powerful motor and motion controller to implement complex movements.
Oriental Motor signs distribution deal with OEM Automatic
One of the leading names in motors and drives, Oriental Motor, has signed a distribution deal with OEM Automatic. OEM Automatic can support customers, especially where an AC or Brushless DC (BLDC) motor has been discontinued or proving hard to source.
Simplex Motion Servomotors
The Simplex Motion integrated servomotor is a brushless DC motor with integrated electronics and outrunner rotor. You can now browse Simplex Motion servomotors on our website.
Get to know PMW Dynamics
OEM Automatic currently offers PMW’s range of standard pancake motors, as well as its bespoke design service. PMW’s motor portfolio caters for customers requiring both brushed and brushless configurations, supplied as housed or frameless, for both geared and direct drive applications.
DOGA launches new 311 and 311E motor range
DOGA’s new 311 and 311E is a right angle geared motor range, available with or without an integrated drive offering CANopen compatibility,
