MINIMOTOR
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
Rated torque up to 2.1 Nm.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.
Please click here for 2D and 3D drawings.
General Data |
|
---|---|
Nominal speed | 3000 rpm |
Nominal torque | 0,4 Nm |
Input voltage dc | 24/48 Vdc |
Digital inputs | 2 pnp (24Vdc, 500kHz) , 3 pnp (24Vdc, 7kHz) |
Outputs | 1 NO 2A (42 Vdc) |
Output power | 125 W |
Rated current | 8A@24V/4.2A@48V A |
Nominal overload | 200% x 60 sec |
Motor control algorythm | Sinusoidal brushless with 12Bit single-turn / 20Bit multi-turn absolute encoder |
Nominal output frequency carrier | 4/8/12 kHz |
Electronic brake output | 24Vdc, max 0.5A |
Ambient temperature | -10 ... +40°C |
Safety Features |
|
IP class | IP65 |
CE approved | Yes |
Over voltage protection | Yes |
Under voltage protection | Yes |
Overheat protection | Yes |
Memory error protection | Yes |
Polarity reverse protection | Yes |
Overcurrent protection | Yes |
Communication error protection | Yes |
Overload protection | Yes |
*Invisible Heading* |
|
---|---|
Communication |
|
Communication | USB |
Ethercat | Yes |
CanOpen | Yes |
ProfiNET | Yes |
Ethernet IP | Yes |
Modbus RTU | Yes |
PowerLink | Yes |
MOTOR: Brushless 4-pole three-phase sinusoidal motor, totally enclosed. Rotor with NdFeB magnets. Thermal cutoff. Winding Class F. Thermal cutoff. Protection IP65 in compliance with IEC/EN 60529 standards. Bearings with reduced backlash and special grease for high temperatures.
Rated torque up to 2.1 Nm.
DRIVE: Power 24 and/or 48 Vdc • Magnetic absolute encoder SSI (12bit single-turn / 20bit multi-turn) with internal buffer battery• 5 PNP digital inputs and 1 analogue input -10 +10V ext. (0-5 or 4-20mA optional) • 1 relay output (NC-NO) • USB port for parametrisation • Torque, speed, position and homing control.
All the models are implemented with the new “open” platform, which permits configuration with the following primary protocols: CanOpen, Ethercat, Modbus, Ethernet/IP, Profinet, Powerlink.
Please click here for 2D and 3D drawings.
At OEM Automatic, we can supply a series of components for your one project. All under one roof. This case study discusses how we supplied several components for our customer's new electro-pneumatic control box.
Technosoft specialise in developing intelligent drives and certainly live up to the term 'intelligent’, by combining a powerful motor and motion controller to implement complex movements.
One of the leading names in motors and drives, Oriental Motor, has signed a distribution deal with OEM Automatic. OEM Automatic can support customers, especially where an AC or Brushless DC (BLDC) motor has been discontinued or proving hard to source.
The Simplex Motion integrated servomotor is a brushless DC motor with integrated electronics and outrunner rotor. You can now browse Simplex Motion servomotors on our website.
OEM Automatic currently offers PMW’s range of standard pancake motors, as well as its bespoke design service. PMW’s motor portfolio caters for customers requiring both brushed and brushless configurations, supplied as housed or frameless, for both geared and direct drive applications.
DOGA’s new 311 and 311E is a right angle geared motor range, available with or without an integrated drive offering CANopen compatibility,
|
|
|
|
|
||
---|---|---|---|---|---|---|
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
Parts | Nominal torque | Input voltage dc | Output power | Rated current | Nominal overload | Price | ||
---|---|---|---|---|---|---|---|---|
24/48V dc 3000rpm 0.4Nm 125W
Art:
DBS 55/50
Copied
|
0,4 Nm
|
24/48 Vdc
|
125 W
|
8A@24V/4.2A@48V A
|
200% x 60 sec
|
| ||
48V dc 3000rpm 0.8Nm 250W
Art:
DBS 55/100
Copied
|
0,75 Nm
|
48 Vdc
|
235 W
|
6.3 A
|
200% x 60 sec
|
| ||
48V dc, 3000rpm, 1.1nm, 345 W
Art:
DBS 80/50
Copied
|
1,1 Nm
|
48 Vdc
|
345 W
|
9.9 A
|
150% x 60 sec
|
| ||
48V dc, 3000rpm, 2.1nm, 660 W
Art:
DBS 80/100
Copied
|
2,1 Nm
|
48 Vdc
|
660 W
|
15.7 A
|
150% x 60 sec
|
|
Select a variant in the list
If you need any help, you can contact us in one of the following ways: