• black icon of a bullhorn 30 years industry experience
  • black icon of three cubes Over 8,000 products in stock
  • Black icon of a clock Order by 16:00 and receive the next working day

Conta-Clip

Conta-Clip
CONTA-CLIP is a manufacturer of DIN Rail, PCB terminals, specialised Electronics and Cable Entry Systems based in Hovelhoff Germany.

The family-owned company was founded in 1977 and is a global player supplying innovative electrical connection products into a wide range of industries. 

CONTA-CLIP is continuing to evolve and improve the construction and features of their din rail terminals and can offer a wide range of connection systems to suit any application.

See Conta-Clip's corporate video below: 

DIN Rail Terminals

Conta-Clip have one of the largest ranges of din rail terminal connection systems. All ranges have a selection of single level, double-level, triple-level, pluggable, disconnect and fuse terminal options. This range of din rail terminals are available for TS35, TS32, TS15 din rail and direct mounting.

There are also many application specific variants including sensor blocks, test disconnect, power distribution, thermo-couple and initiator terminals.

PCB Terminals

Conta-Clip have a range of high-quality PCB connectors all manufactured with polyamide 6.6 UL94-V0 housings with galvanised and passivated metal parts. The range includes fixed PCB mounted terminals and pluggable options from 2.5/2.54mm to 10/10.16mm pitch.

Types of wire clamping connection include: -

  • Wire protection
  • Strain relief clamp
  • Eccentric top
  • Tension spring
  • Leg spring

SMS Reporting Modules

Conta-clip’s SMS Reporting Modules provide a 2G/3G/4G remote control and maintenance solution which allows you to monitor and control decentralized facilities. The data transmission takes place over a serial interface using the Modbus RTU protocol.

Cable Entry and management systems

Conta-Clip have developed a large range of cable entry systems that can accommodate single cables or multiple cables in a small footprint. The range consists of only 3 parts and are quick and easy to assemble, using common split inserts to allow for round or flat cables, tubes & pipes to be fed into an enclosure without the need to remove connectors.  

Conta-clip also provide a range of other cable management solutions:

  • Cable Ferrules: For terminating cable ends, The range includes insulated ferrules for single and dual cables, along with a range of non-insulated if required.
  • Cable lugs & Crimps: uninsulated cable lugs are ideal for terminating on to stud type terminals and for less demanding applications Conta-Clip also offer a range of standard Red, Blue and Yellow insulated crimps
  • Cable Markers: including, individual pre-printed markers, cable marker sleeves with printable inserts, ‘snap on’ cable markers, printable cable tied markers and self-adhesive ‘wrap around’ markers. 
  • Cable shield clips: Conta-Clip offer one of the most comprehensive ranges of practical, simple and quick to mount shielding clip products
  • Cable Trunking: featuring tight fitting covers to prevent slippage, which are easy to fit and remove and the fingers have pre-scored breakage points

Modular for preformed cables

Conta-Clip KDS-SR and KDSI cable entry systems, the ultimate solutions for reliable and efficient cable routing in your industrial applications. Both systems feature a modular design, allowing for easy customization and adaptation to your specific requirements. The KDS-SR system delivers secure and tight cable routing where cables can be routed from the inside of the enclosure, while the KDSI system offers added flexibility with cables fed in from the outside of the enclosure, when it is not possible to assemble from the inside. Both systems use standard industrial connector cut-outs and fixings. Both the KDS-SR and KDSI cable entry systems are built to last, with high-quality materials and robust construction that ensure long-lasting performance. Their IP66 and NEMA 4X ratings provide added protection against environmental factors, making them suitable for even the most demanding industrial environments. Upgrade your cable management game with the Conta-Clip KDS-SR and KDSI cable entry systems today and experience the difference in reliable and efficient cable routing.

Flat Cable

Flange Plate

Round Modular for preformed cables

High density

Conta-Clip KES range cable entry system are the ideal solution when feeding in non-terminated cables, pneumatic tubes and pipes.

Cable Ferrules

Conta-Clip offer a wide range of cable ferrules, also known as Boot Lace ferrules, for terminating cables ends. There are many benefits for using cable ferrules on cables. <h4>Stray Strands</h4> The ferrule reduces the possibility of having stray strands of conductor that could easily cause a short circuit in neighbouring connections. Due to the construction of the ferrule, the strands are guided into pin, then when crimped the strands will no longer be able to separate. <h4>Repeatable Termination</h4> In applications where the cables could be removed and re-terminated, such as replacing components within a Panel, stranded cables can soon break down. This could lead into to the installer having to cut and strip the existing cable in a confined space. The cable ferrule protects the cable and makes it easier to re-insert in to the terminals. The range includes insulated ferrules for single and dual cables, along with a range of non-insulated if required. For easy recognition of the correct ferrule size to use for each cable, the insulated range are colour coded. There are 3 colour standards being used in industry, which all differ slightly: - <ul> <li>DIN <li>German <li>French</li> </ul>

Cable Lugs & Crimps

Conta Clip offer a wide range of cable lugs and crimps for various applications. The uninsulated cable lugs are ideal for terminating on to stud type terminals and range from 1mm² cables with M2.5mm fixing up to 300mm² cables with M16 fixing. These are available in a seamed versions (QKS) and for more demanding applications the tube version (RKS) . The cable lugs conform to the DIN standards EN13599 (QKS) and EN13600 (RKS) For less demanding applications Conta-Clip also offer a range of standard Red, Blue and Yellow insulated crimps. This range consists of ring, fork, spade, faston, pin and butt connectors that all have a widened cable entry, to make termination quick and easy.

Cable Markers

Conta clip offer a wide range of cable marking technologies to suit a wide range of requirements. The range includes individual pre-printed KBH markers and KH cable marker sleeves with printable inserts that slide over the unterminated cables. For greater flexibility Conta-Clip also off selection of ‘snap on’ cable markers that can be fitted without removing any cables. The KMC series can be custom printed on the EMS plotter or marked by hand. In addition, there are a large selection of printable markers that can be cable tied directly around the cable. The KHS, KKM and KMS can also be custom printed and are available in a variety of colours. For a combined cable tie with built in panel the KB cable markers are ideal for larger cables, pipes or hoses. To complete the family, the KKS are a self-adhesive polyester ‘wrap around’ marking system that can be marked by hand or with a thermal printer.

Cable Shield Clips

In the ever growing industry of process engineering and the use of sensitive equipment and PLC's, the need for a higher degree of interference protection is required for these systems. To ensure the best possible EMC protection the cable shielding and grounding is of the upmost importance. The connection point of the cable screen and the clip is a critical point and is required to be a low Ohm resistance and minimum inductive resistance. Conta-Clip offer one of the most comprehensive range of practical, simple and quick to mount shielding clip products on the market today

Cable Trunking

Conta-Clip now offer a wide range of cable trunking to complement their growing portfolio of Cable Management Systems. The cable trunking is suitable for many applications and has excellent dimensional stability. They feature tight fitting covers to prevent slippage, which are easy to fit and remove and the fingers have pre-scored breakage points providing a burr free opening.
Contact us

If you need any help, you can contact us in one of the following ways:

phone 0116 284 9900

Send an e-mail Send an e-mail

comments Use live chat